Dart LT1 heads
#1
Dart LT1 heads
Does anyone know anything about these new dart pro1's for lt1's? Looks like Karl Ellwein got a pair. Was wondering if anyone knows if they will offer them in sizes larger then the 180cc.
http://www.ellweinengines.com/DartERE383.html
http://www.ellweinengines.com/DartERE383.html
#3
In jegs catalog there going for about $1300 assembled and $1029 bare would love to see there potiential and how big they could be opened up to for stroker motors.
http://www.jegs.com/webapp/wcs/store...32783_-1_10187
http://www.jegs.com/webapp/wcs/store...32783_-1_10187
#4
In jegs catalog there going for about $1300 assembled and $1029 bare would love to see there potiential and how big they could be opened up to for stroker motors.
http://www.jegs.com/webapp/wcs/store...32783_-1_10187
http://www.jegs.com/webapp/wcs/store...32783_-1_10187
#10
#11
#14
Well since I know the Dart parts pretty dam well I know for sure that a 320+cfm port can go in these and and do very well.
The new Pro 1 port is a very nice piece and thankfully the LT1 version has a nice small bore and a small port to start from.
I'll have to check my pricing on them from Big D but starting with them as bare castings is a good way to go and right in line with all the other SBC castings. I'm picky about the valves and springs that go with the heads so to me bare always makes the most sense.
Bret
The new Pro 1 port is a very nice piece and thankfully the LT1 version has a nice small bore and a small port to start from.
I'll have to check my pricing on them from Big D but starting with them as bare castings is a good way to go and right in line with all the other SBC castings. I'm picky about the valves and springs that go with the heads so to me bare always makes the most sense.
Bret
Last edited by SStrokerAce; 10-10-2007 at 09:46 PM.
#15
Well since I know the Dart parts pretty dam well I know for sure that a 320+cfm port can go in these and and do very well.
The new Pro 1 port is a very nice piece and thankfully the LT1 version has a nice small bore and a small port to start from.
I'll have to check my pricing on them from Big D but starting with them as bare castings is a good way to go and right in line with all the other SBC castings. I'm picky about the valves and springs that go with the heads so to me bare always makes the most sense.
Bret
The new Pro 1 port is a very nice piece and thankfully the LT1 version has a nice small bore and a small port to start from.
I'll have to check my pricing on them from Big D but starting with them as bare castings is a good way to go and right in line with all the other SBC castings. I'm picky about the valves and springs that go with the heads so to me bare always makes the most sense.
Bret
![Frown](https://www.camaroz28.com/forums/images/smilies/frown.gif)