2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia All 2010 - 2011 - 2012 - 2013 - 2014 - 2015 Camaro news, photos, and videos

Early Camaro SS manual transmission failures reported, factory hold issued

Thread Tools
 
Search this Thread
 
Old 07-14-2009 | 03:42 PM
  #16  
Doug Harden's Avatar
Prominent Member
 
Joined: Dec 1999
Posts: 2,282
This stuff happpens to the best of them. Bad heat treating from the factory is the usual culprit.

As long as you're not clutch dumping, you'll be OK 'till the recall.
Old 07-14-2009 | 09:16 PM
  #17  
HAZ-Matt's Avatar
Registered User
 
Joined: Mar 2001
Posts: 4,000
From: TX Med Ctr
Camaro owners just got GT-R'ed!

Old 07-14-2009 | 09:21 PM
  #18  
MetalDragon's Avatar
Registered User
 
Joined: Apr 2008
Posts: 524
From: Houston Area
Originally Posted by 99SilverSS
Although the Camaro SS uses the same kind of Tremec TR6060 as the Viper/GT500/Z06/ZR1/CTS-V it's certainly not built to the same spec internally as the higher hp and more expensive vehicles.
Source? I'm just curious, because Tremec on lists one TR-6060. While they don't list specs on it, they list specs for the T-56 Magnum, which they say is the aftermarket equivilant and is tested to 700 lbs.
Old 07-15-2009 | 02:15 AM
  #19  
99SilverSS's Avatar
Registered User
 
Joined: Jun 2000
Posts: 3,463
From: SoCal
Originally Posted by MetalDragon
Source? I'm just curious, because Tremec on lists one TR-6060. While they don't list specs on it, they list specs for the T-56 Magnum, which they say is the aftermarket equivilant and is tested to 700 lbs.
Yea the info isn't quite easy to find but this is what I've got after a quick search. I've always heard that the OEM 6-speed manual trans like the T56 and now TR6060 have several HP/Torque and weight ratings for each kind of spec. So lets say the Viper or ZR1 needs up to 700 ft/lbs but the Camaro SS only needs up to 430 ft/lbs. So Tremec makes a trans that fits each particular vehicle so that the OE gets the right gear ratios they want and keep the price down on internal parts that are just good enough for their application.

http://www.camaro5.com/forums/wiki.p...ifications+(SS)

First example is the TR6060 used on the 2010 SS M6 and you can see it's listed as a M10 variant with rated power of 430 ft/lbs

http://media.gm.com/us/powertrain/en..._MH3_MG9_n.doc

Second example is a GM Press release that talks about the TR6060 upgrades for the 2009 MY for the Corvette. Note that in the overview section they talk about the ZR1 using the MH3 variant validated to 620ft/lbs and the CTS-V using the MG9 variant validated to 560 ft/lbs.

http://www.gmhightechperformance.com...ng/tr6060.html

This article on the ZR1 from GMHTP talks about the changes made to the TR6060 (MH3) for the torque and power of the LS9 and yet they go on to say even with the changes the trans feels just like all the other TR6060's in their lineup.

http://media.gm.com/us/powertrain/en...a/10car_us.htm

Lastly here is a quick listing of all engine-trans combos offered by GM. At the bottom of the page it shows that all the different TR6060's offered for just for the LS3 manual trans. Camaro SS has the M10, while in the C6 coupe/convert- MM6, C6 Grand Sport coupe/convert- MZ6.

-The T56 Magnum and aftemarket non-OEM TR6060's I'm sure are more stout than what's in the production cars but as with everything else the price tag is higher too.

Last edited by 99SilverSS; 07-15-2009 at 02:18 AM.
Old 07-15-2009 | 05:22 AM
  #20  
MetalDragon's Avatar
Registered User
 
Joined: Apr 2008
Posts: 524
From: Houston Area
Didn't know that..thanks.
Old 07-15-2009 | 08:54 AM
  #21  
OutsiderIROC-Z's Avatar
Registered User
 
Joined: Aug 2003
Posts: 2,688
From: Middle of Kansas
Originally Posted by HAZ-Matt
Camaro owners just got GT-R'ed!

Old 07-19-2009 | 03:23 AM
  #22  
1camaronut's Avatar
Registered User
 
Joined: Mar 2009
Posts: 24
Good luck in 2 years! If Obama has his way this will be the first and only year for the Camaro! I hope so anyway since mine is due to arrive on July 29th!!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
warmeck
General 1967-2002 F-Body Tech
22
01-20-2015 10:20 PM
cmdeshon
New Member Introduction
3
12-12-2014 11:51 PM
CaRParts102
Parts For Sale
0
12-06-2014 09:45 AM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
12-03-2014 01:30 PM
chevroletfreak
LT1 Based Engine Tech
202
07-04-2005 06:00 PM




All times are GMT -5. The time now is 02:51 AM.