Decal placement measurement for IROC
#1
Decal placement measurement for IROC
I am repainting my IROC and have the door decals already, I know the 85-87 lower rocker stripes were 3/4 and /14 inch to make an inch thick set of stripes. The 85-87's had the black on the bottom and were the 3/4 size. What is the stripe sizes for my 88-90 stripes, I know the black is the smaller stripe this time and is still on the bottom with the silver/red/etc. color being the top color. My question is also, what is the gap measurement between the black and top stripe for the 88-90 cars and how far above the top stripe is the bottom of the IROC door decal placed? I know the edge of the rear portion of the IROC is flush with the door handle and the 85-87 is flush with the edge of the front of the door mirrors.
Okay 88-90 stripe measurements and gap between the 2, measurement and the placement of the IROC door decals.
Any help would be appreciated.
Thanks
Okay 88-90 stripe measurements and gap between the 2, measurement and the placement of the IROC door decals.
Any help would be appreciated.
Thanks
Last edited by Ryanrabbie; 03-06-2004 at 01:40 AM.
#2
http://berlinetta.info/86media.htm
heres 86 brochure... best i could doo 5am
heres 86 brochure... best i could doo 5am
#4
a guy on ebay sells them for like half the classic industrys price. you may want to check him out hes on ebay. thats of course if you ask iroc-t his appproval cause he dosent think iknow what im talking about. `
#5
Originally posted by lordmetalz28
thats of course if you ask iroc-t his appproval cause he dosent think iknow what im talking about. `
thats of course if you ask iroc-t his appproval cause he dosent think iknow what im talking about. `
It was suppose to be funny no harm intended
#6
Originally posted by IROC-T
From the bottom it's Silver 1/2", 1/4"space(body color).Black 3/4"for the stripe and 1 3/4" to the IROC on a '88,is this what you want?
From the bottom it's Silver 1/2", 1/4"space(body color).Black 3/4"for the stripe and 1 3/4" to the IROC on a '88,is this what you want?
Thread
Thread Starter
Forum
Replies
Last Post
gonzo275rltw
3rd Gen / L98 Engine Tech
4
09-07-2015 04:46 PM
gonzo275rltw
LT1 Based Engine Tech
4
09-05-2015 06:26 PM
gonzo275rltw
LS1 Based Engine Tech
2
09-05-2015 06:24 PM