Help!!!
11-28-2003, 05:55 PM
#1
Registered User
Thread Starter
Join Date: Nov 2003
Location: Artesia, NM
Posts: 30
Help!!!
I've got 220 AFR heads. building 396 stroker. I'm going to run a procharger. where can I get a intake that will take care of my needs. Need one that comes in from 4000 to 8000. Any help will
be appreciated!!!!!!!!!!!!!!!!!
be appreciated!!!!!!!!!!!!!!!!!
11-29-2003, 12:21 AM
#3
Registered User
Join Date: Sep 1999
Location: MI
Posts: 2,342
This is where you want to be:
http://www.edelbrock.com/automotive/index.html
Your best bet WILL be a single plane carb style intake, plumbed with 8 injectors like a normal EFI manifold is setup. It will probably be custom made unless Holley, Kinsler, FAST, Edelbrock, Hogan, Weiand, Team G, or anyone else is selling an off the shelf intake like that. Custom made is cool. A Vic. Jr or Super Victor will get the job done with a huge throttle body up top and a good 90 degree elbow on top of that to easily plumb a blower up to it. Do a search on this site. Look up Hot Rod Hawk, he has some great pictures and an overall sweet setup like you need. Goodluck.
http://www.edelbrock.com/automotive/index.html
Your best bet WILL be a single plane carb style intake, plumbed with 8 injectors like a normal EFI manifold is setup. It will probably be custom made unless Holley, Kinsler, FAST, Edelbrock, Hogan, Weiand, Team G, or anyone else is selling an off the shelf intake like that. Custom made is cool. A Vic. Jr or Super Victor will get the job done with a huge throttle body up top and a good 90 degree elbow on top of that to easily plumb a blower up to it. Do a search on this site. Look up Hot Rod Hawk, he has some great pictures and an overall sweet setup like you need. Goodluck.
Last edited by AutoRoc; 11-29-2003 at 12:37 AM.
12-01-2003, 02:18 AM
#4
Registered User
Join Date: Nov 2002
Location: Jacksonville
Posts: 4,784
Holley has a few they sell that already have the injector bosses tapped and ready including fuel rail holders. I'm not sure about Edelbrock. Here's the link for the one I'm using on my GTA.
http://www.holley.com/HiOctn/ProdLin...901-101-1.html
It works pretty well on my 383.
http://www.holley.com/HiOctn/ProdLin...901-101-1.html
It works pretty well on my 383.
12-01-2003, 10:08 AM
#5
Registered User
Join Date: Mar 2003
Location: Markham, ON
Posts: 1,240
Re: Help!!!
Originally posted by balerjoe
I've got 220 AFR heads. building 396 stroker. I'm going to run a procharger. where can I get a intake that will take care of my needs. Need one that comes in from 4000 to 8000. Any help will
be appreciated!!!!!!!!!!!!!!!!!
I've got 220 AFR heads. building 396 stroker. I'm going to run a procharger. where can I get a intake that will take care of my needs. Need one that comes in from 4000 to 8000. Any help will
be appreciated!!!!!!!!!!!!!!!!!
