I'm a dumbass and need help
#1
I'm a dumbass and need help
I just changed the plugs wires cap and rotor on my 97 iroc and like an idiot i did not write down what order to put the wires back in with. I've got to the point where my car starts but i shakes hardcore. if anyone could tell me the correct order it would be much help.
#3
Thanks but i know the firing order.....i put ther wires on the cap the right way(i think) but the car shakes whay it is idling and feels like its missing when i rev it. it was fine before i changed the capand rotor etc.... any other advice please i really wanna drive this car its my first camaro so please please help me
#4
what more do you need to know? 18436572
driver side cylinders from front of car to rear are 1 3 5 7
pass side cylinders from front to rear are 2 4 6 8
the number 1 terminal on your distributor is usually marked. just put that one on and follow the firing order, moving clockwise as you go around the distributor.
driver side cylinders from front of car to rear are 1 3 5 7
pass side cylinders from front to rear are 2 4 6 8
the number 1 terminal on your distributor is usually marked. just put that one on and follow the firing order, moving clockwise as you go around the distributor.
Last edited by mr diabolical; 04-19-2003 at 11:19 PM.
Thread
Thread Starter
Forum
Replies
Last Post
ssr17
Show and Shine / Paint and Body Care
3
12-19-2001 09:41 AM