Iroc?
08-01-2003, 03:46 PM
#1
Registered User
Thread Starter
Join Date: Jul 2003
Location: Stanley Va
Posts: 489
Iroc?
my camaro doesnt have any markins whatso ever..so i got on a site for my vin check and it came out an iroc/z28.......is it an iroc or a z? it says tbi 305 so it shouldnt be an iroc......help please?
08-01-2003, 05:43 PM
#4
Registered User
Join Date: Feb 2002
Location: At car shows and cruise nights!
Posts: 3,647
Z28: 82-87 and 91-92
IROC-Z28: 85-90
The 305 TBI was the base IROC engine but wasn't all that common as most were 305 TPI's. If it's an IROC for real and an 85-87 it'll have RPO B4Z, if it's and 88-90 it'll have RPO Z28.
IROC-Z28: 85-90
The 305 TBI was the base IROC engine but wasn't all that common as most were 305 TPI's. If it's an IROC for real and an 85-87 it'll have RPO B4Z, if it's and 88-90 it'll have RPO Z28.
08-01-2003, 06:54 PM
#6
Registered User
Thread Starter
Join Date: Jul 2003
Location: Stanley Va
Posts: 489
advantages?
also i dont know what advantages i have over the other modle 88's....what would they be? also any detail,advice, and ANYTHING u guys think i should know would be greatly apreciated.....
peace out from ur fellow camaro enthusiest (sp)
peace out from ur fellow camaro enthusiest (sp)
08-01-2003, 07:40 PM
#8
Registered User
Join Date: Apr 2000
Location: T-town
Posts: 1,677
Advice: Look under the lid of your center console and copy down the 3-digit RPO codes. Then go to www.thirdgen.org and run every RPO on the list through their RPO decoder. That'll tell you EXACTLY what you have.
Then get subframe connectors.
Then get subframe connectors.
08-01-2003, 08:41 PM
#10
Registered User
Join Date: Feb 2002
Location: At car shows and cruise nights!
Posts: 3,647
Go to www.ThirdGen.org and read the Tech Data.
08-02-2003, 01:59 AM
#12
Registered User
Join Date: Jun 2003
Location: Your rear view mirror...
Posts: 244
Originally posted by TheGreatJ
Advice: Look under the lid of your center console and copy down the 3-digit RPO codes. Then go to www.thirdgen.org and run every RPO on the list through their RPO decoder. That'll tell you EXACTLY what you have.
Then get subframe connectors.
Advice: Look under the lid of your center console and copy down the 3-digit RPO codes. Then go to www.thirdgen.org and run every RPO on the list through their RPO decoder. That'll tell you EXACTLY what you have.
Then get subframe connectors.
