Center colsole?
04-24-2005, 07:38 PM
#2
Registered User
Join Date: Jan 2004
Location: Chesterfield Twp, MI
Posts: 2,111
Re: Center colsole?
ebay, or...
(Credit to Brent's page with the writeup...)
(Credit to Brent's page with the writeup...)
Originally Posted by http://www.bfranker.badz28.com/fbody/console.htm
You can reach Kerry at the following:
Lambert Auto Salvage
2412 South Second St.
Booneville, MS 38829
Phone ( 662 728 0409 )
Fax ( 662 728 0489 )
Toll Free ( 877 728 0409)
Email: zparts@aol.com
Lambert Auto Salvage
2412 South Second St.
Booneville, MS 38829
Phone ( 662 728 0409 )
Fax ( 662 728 0489 )
Toll Free ( 877 728 0409)
Email: zparts@aol.com
04-24-2005, 07:39 PM
#3
Registered User
Join Date: Dec 2003
Location: Waco, TX
Posts: 2,076
Re: Center colsole?
Post this in the parts wanted section here on the board. If that don't work try: http://www.tacreationsusa.com/
04-27-2005, 10:10 AM
#5
Registered User
Join Date: May 2001
Location: Northwest GA
Posts: 2,534
Re: Center colsole?
I have one that I would get rid of.
It is from a '99. It is for an Auto.
I have well more than that in mine. Contact me via PM or E-mail if you are interested KyleW93z.
It is from a '99. It is for an Auto.
Originally Posted by Z95m6
You might want to check LS1tech.com most of the guys have 97+ consoles in their cars so they aren't that desirable to those guys. I've seen them sell for as little as $45
04-27-2005, 12:56 PM
#6
Registered User
Join Date: Dec 1999
Location: Orlando, FL
Posts: 437
Re: Center colsole?
Be careful one the color of the console. You need an ebony one or the Graphite color one will stick out because of the difference. My ebony console looks great. And the original was a great part to chop up to make a radio block off plate.
04-27-2005, 03:24 PM
#7
Registered User
Join Date: Oct 2001
Location: newton, kansas, USA
Posts: 6,070
Re: Center colsole?
Originally Posted by MadKilla
Be careful one the color of the console. You need an ebony one or the Graphite color one will stick out because of the difference. My ebony console looks great. And the original was a great part to chop up to make a radio block off plate.
Thread
Thread Starter
Forum
Replies
Last Post
WobblySausage
Drivetrain
4
10-07-2015 10:09 AM
RX Speed Works
Supporting Vendor Group Purchases and Sales
1
08-20-2015 03:40 PM