okay - as i start everypost my car was a wreck so who knows what could be wrong-

anyway- since i got car back on road shes been running perfectly however i noticed if i launched hard my ABS INOP light would come on- soon as i restart car it would be off and things would be fine.

well its now getting very cold out and noticed today that the ABS light is staying on and the ABS is not functioning- Just wondering what the cause to this could be- i really dont care since i hate ABS but i was just curious

 

Here did you get hit at? On the wheel hub there are abs sensors that might have took a dump, broken wire....

 

front end- pic is in the sig- so im thinking that aint the problem-

going home in 2 weeks so figure its time for a 6 month review and see if anymore bugs have revealed themselves

thnx though

 

i was having a problem that when i got on my car hard the ABS light was coming on. Also my voltage was only reading 12.5 volts. It ended up being my old fuel pump was eating up so much juice that under hard throttle it was taking enough juice to set off the ABS light. At least thats what i assume becuase the ABS and fuel pump plug into the same junction block and a new fuel pump fixed the problem.