LS1 Based Engine Tech LS1 / LS6 / LS2 / LS3 / LS7 Engine Tech

Boggin! But why?

Thread Tools
 
Search this Thread
 
Old 04-21-2008 | 07:29 AM
  #1  
WVUboy's Avatar
Thread Starter
Registered User
 
Joined: Apr 2008
Posts: 27
From: RAF Lakenheath, Cambridge, UK
Boggin! But why?

Oaky, bare with me here I am at my office computer and cant download the spell check. I spell like a crossed-eyed first grader. Sorry... Now to the problem..


Well my 99 z boggs in the begining of all my gears and then cuts right back in.. Well i got a fault on my OBD2 reader saying Low volts to my o2 sensors... I changed them all and reset the codes..

The engine still boggs.. Dont know why.. Also i still get the errors for low volts to o2 sensors (one on bank 1 and one on bank 2) . I just went on LMperformance and ordered some new spark plugs.

A gentelman that i work with said that i may be the Shi^*y gas we get here on our base. So, he recomonded some octane booster. Well after reading a few threads i got a slight hint that octane booster is really bad on the o2 sensors.. I know i seem like a NOOB but i am comming along.

Crap! One more thing..
The color of my Z is Hugger Orange... Not the most popular color over here amongst the europeans. So, can i go directly to GM and get the color? Or are there better places? Thanks in advance guys!
Old 04-21-2008 | 09:07 AM
  #2  
Chrome383Z's Avatar
Registered User
 
Joined: May 2004
Posts: 2,043
From: Shelbyville, IN
Replace the 02 sensors???
Old 04-21-2008 | 09:13 AM
  #3  
WVUboy's Avatar
Thread Starter
Registered User
 
Joined: Apr 2008
Posts: 27
From: RAF Lakenheath, Cambridge, UK
Originally Posted by Chrome383Z
Replace the 02 sensors???
hmm? I changed all of them out with new ones. I dont think i get what you are saying.
Old 04-21-2008 | 12:06 PM
  #4  
ss.slp.ls1's Avatar
Registered User
 
Joined: Oct 2007
Posts: 912
From: Orange County, CA
You need to check the o2 wiring from the connector and back for burns, damage, or corrosion. The pre-cat o2's are the only ones that will affect your performance.
Old 04-21-2008 | 12:30 PM
  #5  
Chrome383Z's Avatar
Registered User
 
Joined: May 2004
Posts: 2,043
From: Shelbyville, IN
Originally Posted by WVUboy
hmm? I changed all of them out with new ones. I dont think i get what you are saying.
Oh, ok; i missed that.
Old 04-21-2008 | 02:43 PM
  #6  
Marc 85Z28's Avatar
Registered User
 
Joined: Dec 1999
Posts: 2,022
From: MD
Stop throwing parts at the car due to what a scanner tells you. The DTC descriptions on aftermarket scanners are horrible. Tell us what the actual DTCs were (it should read Pxxxx, where xxxx is the DTC number that we need). You may have lean codes, and the junk scanner is falsely assigning it an to O2 sensor problem description.
Old 04-22-2008 | 08:53 AM
  #7  
Kraest's Avatar
Retired
 
Joined: Oct 1999
Posts: 3,167
From: Inside Uranus
Very well could be ****ty gas. These cars are supposed to use premium. Octane booster won't hurt cats.
Old 04-23-2008 | 07:52 AM
  #8  
WVUboy's Avatar
Thread Starter
Registered User
 
Joined: Apr 2008
Posts: 27
From: RAF Lakenheath, Cambridge, UK
Originally Posted by Marc 85Z28
Stop throwing parts at the car due to what a scanner tells you. The DTC descriptions on aftermarket scanners are horrible. Tell us what the actual DTCs were (it should read Pxxxx, where xxxx is the DTC number that we need). You may have lean codes, and the junk scanner is falsely assigning it an to O2 sensor problem description.

Thanks! I will have to get back with that tomorrow as my scanner is at the house... Or i could just post them when i get home.. Anyway i shall throw them up on here. Thanks again!
Old 04-24-2008 | 08:03 AM
  #9  
WVUboy's Avatar
Thread Starter
Registered User
 
Joined: Apr 2008
Posts: 27
From: RAF Lakenheath, Cambridge, UK
Originally Posted by Marc 85Z28
Stop throwing parts at the car due to what a scanner tells you. The DTC descriptions on aftermarket scanners are horrible. Tell us what the actual DTCs were (it should read Pxxxx, where xxxx is the DTC number that we need). You may have lean codes, and the junk scanner is falsely assigning it an to O2 sensor problem description.
one code was P0157
Old 04-24-2008 | 09:04 AM
  #10  
ss.slp.ls1's Avatar
Registered User
 
Joined: Oct 2007
Posts: 912
From: Orange County, CA
Originally Posted by WVUboy
one code was P0157
That's bank 2 sensor 2 o2 sensor circuit low voltage. This will not have any affect on performance.
Old 04-24-2008 | 07:45 PM
  #11  
SSpdDmon's Avatar
Registered User
 
Joined: May 2003
Posts: 1,747
From: Farmington, MI
I wonder if you're MAF is on the way out. Any chance a buddy can loan you a MAF from an LS1 f-body to swap in and try?
Old 04-24-2008 | 07:46 PM
  #12  
SSpdDmon's Avatar
Registered User
 
Joined: May 2003
Posts: 1,747
From: Farmington, MI
Originally Posted by Chrome383Z
Replace the 02 sensors???
Glad to see my quote is still around!
Old 04-25-2008 | 03:50 AM
  #13  
WVUboy's Avatar
Thread Starter
Registered User
 
Joined: Apr 2008
Posts: 27
From: RAF Lakenheath, Cambridge, UK
Originally Posted by SSpdDmon
I wonder if you're MAF is on the way out. Any chance a buddy can loan you a MAF from an LS1 f-body to swap in and try?

I think mine is the only Camaro in the whole area. I guess i am kinds screwed on this one. Hmmm
Old 04-25-2008 | 04:04 AM
  #14  
farva's Avatar
Registered User
 
Joined: Apr 2006
Posts: 44
From: Ft. Campbell, KY
Hey WVUboy Where are you stationed. I am out of katterbach germany.
Old 04-25-2008 | 04:40 AM
  #15  
WVUboy's Avatar
Thread Starter
Registered User
 
Joined: Apr 2008
Posts: 27
From: RAF Lakenheath, Cambridge, UK
Originally Posted by farva
Hey WVUboy Where are you stationed. I am out of katterbach germany.
I am stationed at RAF Croughton.. Outside of London... About 70 miles... England that is..


Quick Reply: Boggin! But why?



All times are GMT -5. The time now is 10:37 PM.