1.6rr question

Reply Subscribe

Thread Tools

Search this Thread

06-24-2007, 05:52 PM

TurboXL

Registered User

Thread Starter

Join Date: Mar 2006

Location: McChord AFB, WA

Posts: 102

1.6rr question

I've read that many 1.6rr sets will not fit under stock valve covers... so my question is which, if any, will fit under stock valve covers?
And still perform of course.

06-24-2007, 06:11 PM

The Engineer

Registered User

Join Date: Jan 2005

Location: Moore Oklahoma

Posts: 1,388

Crane Gold 1.6 self-aligning RRs will fit without any problems.

WD

06-24-2007, 06:15 PM

ricehammer

Registered User

Join Date: Nov 2006

Location: Roanoke VA

Posts: 334

COMP Magnums will, but they're a stamped steel roller design.

06-24-2007, 06:51 PM

TurboXL

Registered User

Thread Starter

Join Date: Mar 2006

Location: McChord AFB, WA

Posts: 102

These the ones? http://store.summitracing.com/partde...6&autoview=sku
Just ask cuz these say extruded and I haven't seen that before.
Thanks

06-24-2007, 07:02 PM

reamo04

Registered User

Join Date: Aug 2006

Location: Kansas

Posts: 3,706

what about the promagnums? Ive heard that u can clearance the stock valve covers. 1.6RRs is my next thing im doing and i was wondering this same thing

06-24-2007, 07:32 PM

The Engineer

Registered User

Join Date: Jan 2005

Location: Moore Oklahoma

Posts: 1,388

Quote:

Originally Posted by TurboXL

These the ones? http://store.summitracing.com/partde...6&autoview=sku
Just ask cuz these say extruded and I haven't seen that before.
Thanks

Yes, those are the correct ones. I have them on my engine and I'm very happy with them. I also have Crane 3/8" pushrods.

WD

06-24-2007, 07:35 PM

reamo04

Registered User

Join Date: Aug 2006

Location: Kansas

Posts: 3,706

if u do 3/8" instead of 7/16", you do not need to change the studs, correct? Would there be any problem in using a 3/8" compared to the 7/16 in an all motor setup?