1995 350 LT1 Blown Head Gasket
#16
Thanks For Answering
For what it's worth, I just did a set of heads/intake on mine. It is time consuming BUT if you take your time, pay attention to how things come off, you'll be fine. There wasn't anything that was a real pain in the a$$ except the headers. If you decide to do the headgasket job, ask questions on here as you go. Also do searchs for things like sealing head bolts, torque specs/patterns etc..... Personally, I'd put a budget rebuild in the car. There are supporting vendors on here that can build a long block for you but again, that is up to you. I am glad to hear you love the car, I think alot of us on here cuss at our cars but wouldn't give 'em up!! Good luck!
#17
Thats Good Advice
My bf goodrich g-force sports were less than $500 (maybe even less than $450) shipped, mounted, and balanced.
As for your rebuild, just shop around really. And take my advice here: PAY WITH A CREDIT CARD. That way if the shop ****s you, you can dispute the charges. I wish I did this with my gear install (I do all my own work except stuff like that).
As for your rebuild, just shop around really. And take my advice here: PAY WITH A CREDIT CARD. That way if the shop ****s you, you can dispute the charges. I wish I did this with my gear install (I do all my own work except stuff like that).
#19
#20
Your best bet would be to search a local f body message board for someone who does their own work/ side work. Try to find someone who you could work with. If you were in Wisconsin I could help you. This route is usually alot cheaper than a shop, providing the person doing the work knows what they are doing.
Good luck
Kory
Good luck
Kory
#21
I Have A Question
Your best bet would be to search a local f body message board for someone who does their own work/ side work. Try to find someone who you could work with. If you were in Wisconsin I could help you. This route is usually alot cheaper than a shop, providing the person doing the work knows what they are doing.
Good luck
Kory
Good luck
Kory
#22
Start out looking in the regional section of this message board. Scroll down to the bottom of the main page. Then choose the section for your area. Post in that forum looking for someone who does side work.
That should get you started.
Hope this helps.
Kory
That should get you started.
Hope this helps.
Kory
#23
local help...
If you lived near Springfield Mo i'd help!
I did this exact thing for Critter on here (do a search for critter!)when he lived here going to college, and everything turned out great! He calles me (he lives in Texas now!) once in a while to let me know how its going! Sorry Pennsylvainia is a bit too far.
I did this exact thing for Critter on here (do a search for critter!)when he lived here going to college, and everything turned out great! He calles me (he lives in Texas now!) once in a while to let me know how its going! Sorry Pennsylvainia is a bit too far.
#24
Thanks For The Insight
This is a help. I appreciate your guidance. I'm going to post tomorrow.
#25
I Agree
I've worked on my other cars that I owned but there is something about this one that scares me. I don't even change my own oil with this car.
#26
Thanks
If you lived near Springfield Mo i'd help!
I did this exact thing for Critter on here (do a search for critter!)when he lived here going to college, and everything turned out great! He calles me (he lives in Texas now!) once in a while to let me know how its going! Sorry Pennsylvainia is a bit too far.
I did this exact thing for Critter on here (do a search for critter!)when he lived here going to college, and everything turned out great! He calles me (he lives in Texas now!) once in a while to let me know how its going! Sorry Pennsylvainia is a bit too far.
#27
very first thing is to head over to http://shbox.com/page/index.html
lots of info there. Its been a great refresher for me having been away from the lt1 for about 5 yrs now.
The cars are easy to work on, just be patient w/ it and use the right tool for the job.
definitely check out discount tires site. sometimes they run a deal for $100 off on a set.
Just call around to some engine shops or find a car show and ask people who they use.
Figure on $1000-1800 for machine work and stock quality rebuild parts if you can remove the engine and take it into the shop depending on the damage thats done and what can be reused.
lots of info there. Its been a great refresher for me having been away from the lt1 for about 5 yrs now.
The cars are easy to work on, just be patient w/ it and use the right tool for the job.
definitely check out discount tires site. sometimes they run a deal for $100 off on a set.
Just call around to some engine shops or find a car show and ask people who they use.
Figure on $1000-1800 for machine work and stock quality rebuild parts if you can remove the engine and take it into the shop depending on the damage thats done and what can be reused.
#28
Don't be afraid to work on it yourself. It is no different than any other car. It does however take some special tricks/tactics to do some things. For example, the factor recomends dropping the engine out the bottom. MANY people on this board, myself included, have yanked the motor out the top. Fix what breaks (ebay is your friend on some things) and keep it, and enjoy it. That is why I still have mine.
#29
Thanks For The Link
very first thing is to head over to http://shbox.com/page/index.html
lots of info there. Its been a great refresher for me having been away from the lt1 for about 5 yrs now.
The cars are easy to work on, just be patient w/ it and use the right tool for the job.
definitely check out discount tires site. sometimes they run a deal for $100 off on a set.
Just call around to some engine shops or find a car show and ask people who they use.
Figure on $1000-1800 for machine work and stock quality rebuild parts if you can remove the engine and take it into the shop depending on the damage thats done and what can be reused.
lots of info there. Its been a great refresher for me having been away from the lt1 for about 5 yrs now.
The cars are easy to work on, just be patient w/ it and use the right tool for the job.
definitely check out discount tires site. sometimes they run a deal for $100 off on a set.
Just call around to some engine shops or find a car show and ask people who they use.
Figure on $1000-1800 for machine work and stock quality rebuild parts if you can remove the engine and take it into the shop depending on the damage thats done and what can be reused.
#30
Thank You
Don't be afraid to work on it yourself. It is no different than any other car. It does however take some special tricks/tactics to do some things. For example, the factor recomends dropping the engine out the bottom. MANY people on this board, myself included, have yanked the motor out the top. Fix what breaks (ebay is your friend on some things) and keep it, and enjoy it. That is why I still have mine.