Are 30# injectors big enough?
#1
Are 30# injectors big enough?
I have a gm847 with 1.6rr's and home ported heads on a forged 355. i'm pretty ssure I need to spin it to around 6800. I've got all the bolt ons as well. I also plan on going to a single-plane intake in about a year. I just found a guy thats selling his 30# accels for $75 shipped. Should I take it or do I need bigger injectors? If I went ahead and got injectors for my future setup, would they not complement my current setup?
#3
Re: Are 30# injectors big enough?
Right now I'm pushing ~400rwhp or ~460fwhp. When I get the super vic I will make other upgrades and hope to be pushing ~500rwhp or ~575fwhp by then.
#6
Re: Are 30# injectors big enough?
I think it would be close with 30lbs if you start to get around 450 or so. If you are at 400 rwhp right now I think you could go 36lbs/hr and grow into them as you push for your 500 rwhp goal. On a side note I would stay away from Accel injectors. I personally haven't owned them, but I have read quite a few posts and seen a few mpegs of people who have serious problems with them. A lot of people use SVO injectors and you can find them for sale here when people upgrade in good shape for fairly cheap.
#7
Re: Are 30# injectors big enough?
So would I lose anything if I went ahead and got some 36# injectors right now? I heard that if they're too big, their spray pattern isn't as clean. Is this true?
#8
Re: Are 30# injectors big enough?
Originally Posted by Kurt Crosbie
So would I lose anything if I went ahead and got some 36# injectors right now? I heard that if they're too big, their spray pattern isn't as clean. Is this true?
If ya don't want to buy another set when ya go for 500RWHP ya need to get 42's and a tune.
At 575FWHP 36# will have a 94.7% DC@45PSI with a BSFC of .50,that WILL NOT make it.The spray pattern don't count if they won't make the power.
#9
Re: Are 30# injectors big enough?
I dont think you understand me fully. Will 42# injectors hurt me for the time being? Are you saying that tuned, for now, either will be equally effiecient? In that case, I want some 42# injectors. Is 42# the smallest you would want to go with 575fwhp?
#10
Re: Are 30# injectors big enough?
Originally Posted by Kurt Crosbie
I dont think you understand me fully. Will 42# injectors hurt me for the time being? Are you saying that tuned, for now, either will be equally effiecient? In that case, I want some 42# injectors. Is 42# the smallest you would want to go with 575fwhp?
Unless ya want to buy a big pump and turn the FP WAY UP To 50PSI on the 36's.That gives ya a 89.8 DC@.50BSFC.That is MAXED out.But ya could go even higher with FP if ya got that big pump and fuel system$$$$$$.
#12
Re: Are 30# injectors big enough?
Originally Posted by Kurt Crosbie
In that case I will go with the 42# injectors as long as they are not too much more than the 36# injectors. Where should I buy them from?
Get a set of Ford Motorsport. I would shop around and see if I couldn't catch some on sale on some of the Ford sites or Summett.
Ask or PM Ion or Bryan about the tuning and what ya are going to do later.
#14
Re: Are 30# injectors big enough?
Originally Posted by Kurt Crosbie
I definitly will. Would ebay not be a good choice?
I have got set's off of there before but they were balanced set's and called the injection house that balanced them to see.