LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

4.10 gear ratio

Thread Tools
 
Search this Thread
 
Old 04-03-2004, 06:44 PM
  #1  
Registered User
Thread Starter
 
matts_z28's Avatar
 
Join Date: Nov 2003
Location: MI
Posts: 98
4.10 gear ratio

I want to put a new gear ratio in my car. I have the stock 3.42 gear with a 6 speed. I want more take off speed. What is the ups and downs to changing the gear. Will this affect my speedometer or anything. Or would it be better if I changed my gear to a 3.73 or 3.90. A friend of mine told me I would not notice much difference going from a 3.42 to a 3.73. He told me to change it to a 4.10. Will a 4.10 gear be horrible on the highway? Just some concernse before I do it.
matts_z28 is offline  
Old 04-03-2004, 06:52 PM
  #2  
Registered User
 
stereomandan's Avatar
 
Join Date: Jun 2003
Location: Saginaw, Michigan
Posts: 3,620
It will change your speedo unless you get your PCM reprogrammed.

If you do A LOT of highway driving then 4.10's might be a little much. If you already have traction problems in 1st gear, then 4.10's may be too much also.

A lot of people like the 4.10's, but for a daily driver, it's too much for me. I might go 3.73's, but that's it.

I'm pretty conservative though with that kind of stuff because 60%+ of my driving is 65 mph+

At WOT, lower rear gears don't help much past about 37 mph.

Dan
stereomandan is offline  
Old 04-03-2004, 06:58 PM
  #3  
Registered User
Thread Starter
 
matts_z28's Avatar
 
Join Date: Nov 2003
Location: MI
Posts: 98
Would I have to do anything to the computer to change to a 3.73?
matts_z28 is offline  
Old 04-03-2004, 06:59 PM
  #4  
Registered User
 
stereomandan's Avatar
 
Join Date: Jun 2003
Location: Saginaw, Michigan
Posts: 3,620
Any time you change the rear gear ratio, it will change your speedo.

Dan
stereomandan is offline  
Old 04-03-2004, 07:00 PM
  #5  
Registered User
Thread Starter
 
matts_z28's Avatar
 
Join Date: Nov 2003
Location: MI
Posts: 98
how do I change it in the computer?
matts_z28 is offline  
Old 04-03-2004, 07:06 PM
  #6  
Registered User
 
stereomandan's Avatar
 
Join Date: Jun 2003
Location: Saginaw, Michigan
Posts: 3,620
Originally posted by matts_z28
how do I change it in the computer?
You can either send it to someone like PCMforless or MadZ28, or the Hypertech Power Programmer can change it, but it costs $$$.

I think you can get it done for $75 from www.madz28.com plus a few other goodies. Look here: www.madz28.com He goes by madwolf on this site and his name is Ion. He just did mine last week, but for other reasons.

Dan
stereomandan is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
anmar A
Drivetrain
4
05-02-2015 06:59 PM
Drtryder
LT1 Based Engine Tech
10
04-22-2015 04:17 PM
camy 1993
New Member Introduction
2
02-01-2015 07:16 PM
Noer
Parts Wanted
0
01-19-2015 10:19 AM
squinn
Midwest
1
08-04-2002 01:06 PM



Quick Reply: 4.10 gear ratio



All times are GMT -5. The time now is 10:38 AM.