AFR 195 Street Eliminator heads
#1
AFR 195 Street Eliminator heads
Who is running these heads on a bolt-on 350 non carb LT1? I hear they are the best heads available. Where are the dyno and track numbers? Anyone?
Thanks
Thanks
Last edited by rickreeves1; 10-20-2008 at 11:41 AM.
#3
i have seen no info on the afr elim heads i know a guy that supposedly has a set but is never gonna finish his car lol
but there is a guy on here with the dart 200cc running running bottom 11's at over 120 with as cast heads with a 306 cam
so those should be pretty decent heads
but there is a guy on here with the dart 200cc running running bottom 11's at over 120 with as cast heads with a 306 cam
so those should be pretty decent heads
#4
Thanks for the replies. I find it hard to believe that these heads have been out there for a while now and no one has any results on that type of setup. I havent seen too much on the dart pro LT1's either.
#5
I've seen a few guys with them over on Corvetteforum, but they're all running strokers. I have AFR 210 eliminators, but they're on a 370ci stroker.
For what it's worth, I'm very happy with mine. 476RWHP with a relatively mild cam (230/236, .624 lift).
For what it's worth, I'm very happy with mine. 476RWHP with a relatively mild cam (230/236, .624 lift).
Last edited by 96lt4vette; 10-24-2008 at 10:37 AM. Reason: Corrected to reflect reality!
#6
Uh, is that 576 rwhp you say? On a stroked LT1 block? How much nitrous?
#12
#13
Well she started up this weekend, sounds sick. The motor sounds extremely healthy. I haven't got into it hard yet, but I have given it some RPM for break in. It feels as though the power is there, it still has my old tune it though. Just trying to get a few miles on it right now, then headed to the dyno at the end of the month. I'll post results then.
#14
Well she started up this weekend, sounds sick. The motor sounds extremely healthy. I haven't got into it hard yet, but I have given it some RPM for break in. It feels as though the power is there, it still has my old tune it though. Just trying to get a few miles on it right now, then headed to the dyno at the end of the month. I'll post results then.