Anyone run a Monoblade?
01-08-2006, 08:24 PM
#16
Banned
Join Date: May 2003
Location: LA (lower Alabama)
Posts: 6,661
Re: Anyone run a Monoblade?
Originally Posted by 96speed
Not really another option 
.
The header tubes are smaller than the adapter plates (exhaust residue on header flange). Let me ask, does this barrier need to be immediately before the header? I know the adapter plates are larger than the ports, so the adapter plates in their current size are "using" the exhaust port itself as a barrier.
Does this have a different effect than we are after?
Edit: I think I answered my own question:
If exhaust is having to hit the flange of the header before it escapes, our system isn't as efficient as it could be.
Always something!
. The header tubes are smaller than the adapter plates (exhaust residue on header flange). Let me ask, does this barrier need to be immediately before the header? I know the adapter plates are larger than the ports, so the adapter plates in their current size are "using" the exhaust port itself as a barrier.
Does this have a different effect than we are after?
Edit: I think I answered my own question:
If exhaust is having to hit the flange of the header before it escapes, our system isn't as efficient as it could be.
Always something!
Seems like if there is a "wall"(head,adaptor,ect) on the lower portion of the port and the header hangs down below the port that is suffecient. There only has to be 1/8" or so below the port,just something to prevent the pulse/wave from going back into the port.
There have been all kind of anti reversion shapes tried but the best I can gather that a flat(edge of head,adaptor,ect) does just as good.
These waves supposedly only travel on the bottom of the header tube.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM