anyone trap 110mph on stock heads N/A?
04-03-2004, 11:15 AM
#46
Registered User
Join Date: Feb 2001
Location: New Bern, NC USA
Posts: 1,234
I trapped 112 several times the last time I went.
Mods are 1 3/4 slps, mandrel 3" exhaust, flowmaster, CSI H20 pump, Crane RR 1.6, Moroso CAI.
Stock pulleys, mass air and throttle body. And that is with 50lbs of wheel and tire at each corner
Mods are 1 3/4 slps, mandrel 3" exhaust, flowmaster, CSI H20 pump, Crane RR 1.6, Moroso CAI.
Stock pulleys, mass air and throttle body. And that is with 50lbs of wheel and tire at each corner
05-15-2005, 12:09 AM
#47
Registered User
Join Date: Jan 2003
Location: Tejas
Posts: 780
Re: anyone trap 110mph on stock heads N/A?
I trapped a best of 109 mph and 12.61 ET's and that was with all the bolt-on's and stock weight for a 96 WS6 6 spd ( I did have slicks & skinnies on the car). 
(No cam or heads)
I trapped 109 mph with everything listed above, but I did not have a PCM tune or a cut-out. I'm pretty sure now that I have the PCM tuned and a cut-out with some other weight savings I think the car should see 110 for sure and maybe some 12.30's still a stock bolt-on 6spd LT1
(No cam or heads)I trapped 109 mph with everything listed above, but I did not have a PCM tune or a cut-out. I'm pretty sure now that I have the PCM tuned and a cut-out with some other weight savings I think the car should see 110 for sure and maybe some 12.30's still a stock bolt-on 6spd LT1
Last edited by 96SilverRam; 05-15-2005 at 01:14 PM.
05-15-2005, 12:24 AM
#48
Registered User
Join Date: Jul 2003
Location: Cliffside Park, NJ
Posts: 1,668
Re: anyone trap 110mph on stock heads N/A?
I'm hoping for somewhere close to a 110 trap once I get my headers on.
Also... with a better 60ft, doesn't that decrease trap speeds?
I trapped 103.98 or something like that with a 2.3/2.4 60ft.
But I was shifting 400 rpms early or something like that (Tach is way off)
I want a 105 trap with a 2.1 60ft... but best I could muscle out was a 2.2 but even then my trap wasn't any better nor was my time.
?
Also... with a better 60ft, doesn't that decrease trap speeds?
I trapped 103.98 or something like that with a 2.3/2.4 60ft.
But I was shifting 400 rpms early or something like that (Tach is way off)
I want a 105 trap with a 2.1 60ft... but best I could muscle out was a 2.2 but even then my trap wasn't any better nor was my time.
?
05-15-2005, 10:19 PM
#54
Registered User
Join Date: Apr 2003
Location: PA
Posts: 1,591
Re: anyone trap 110mph on stock heads N/A?
Mkent,
I have the 218/224 and trapped 112 in a full weight car, m6 though. I used to have a webpage with all my mods, dyno's, ect but i lost the free hosting. Let me know if you have any more specific questions about the setup.
-brent
I have the 218/224 and trapped 112 in a full weight car, m6 though. I used to have a webpage with all my mods, dyno's, ect but i lost the free hosting. Let me know if you have any more specific questions about the setup.
-brent
05-16-2005, 09:12 AM
#57
Registered User
Thread Starter
Join Date: Dec 2001
Location: Ohio
Posts: 1,026
Re: anyone trap 110mph on stock heads N/A?
Originally Posted by 94formulabz
Mkent,
I have the 218/224 and trapped 112 in a full weight car, m6 though. I used to have a webpage with all my mods, dyno's, ect but i lost the free hosting. Let me know if you have any more specific questions about the setup.
-brent
I have the 218/224 and trapped 112 in a full weight car, m6 though. I used to have a webpage with all my mods, dyno's, ect but i lost the free hosting. Let me know if you have any more specific questions about the setup.
-brent
Thread
Thread Starter
Forum
Replies
Last Post