Cam Spec Questions

Reply Subscribe

Thread Tools

Search this Thread

10-23-2006, 10:30 PM

#16

johnny3986

Registered User

Thread Starter

Join Date: Jan 2006

Location: Rolla/Blue Springs, Missouri

Posts: 494

Re: Cam Spec Questions

Quote:

Originally Posted by seawolf06

You really should. At least get rid of the stock stamped ones, they're pretty weak. I got comp pro mag 1.6 RR.

Yeah, the stockers were getting deep 6'd in this switch, but I didn't know if 1.6rr with the Extreme Energy cam described was going to be too much lift....AND since I didn't know how to check the valvetrain geometry (measurements and such), I just wanted to check.

If 1.6rr were too much, I was going to use 1.5rr

What are the blue racers??

10-24-2006, 08:23 AM

#17

chrism400

Registered User

Join Date: Jun 2003

Location: Dayton, OH

Posts: 890

Re: Cam Spec Questions

Blue Racers used to be made by Wolverine which was acquired by Crane. The are a lower cost option from Crane and work perfectly well while fitting under the stock valve covers. 1.6 's will be fine as there is PLENTY of piston to valve clearance with a stock setup and 503 cam.