LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

Can a decent 4th Gen. Camaro be had for $5k?

Thread Tools
 
Search this Thread
 
Old 02-23-2003 | 10:48 PM
  #16  
JordonMusser's Avatar
West South Central Moderator / Special Guest
 
Joined: Dec 1998
Posts: 1,650
From: Coppell, TX USA
Of course! I found a CLEAN 94 Z28 for my GF, 85K miles, 30K on the motor/driveline.. all new opti/clutch wireing harness. car has subframes, catback. car is cherry, one door ding in the left quarter. $4500
Old 02-23-2003 | 10:51 PM
  #17  
windnsea00's Avatar
Registered User
 
Joined: Feb 2003
Posts: 149
From: la jolla, ca
man i wish mine was reliable as some of yours...i just got mine like 3 weeks ago...visually the exterior and interior are great...but just the other day the tranny started slipping and banging insane hard with only 90k miles...i also need new pads and rotors all around, new rack and pinon, tie rods, fix an oil leak (im guessing intake manifold)....if i need a whole new tranny...well im walking for a long *** time seeing that i owe my dad $3k still on the car and a whole new tranny goes for that....
Old 02-23-2003 | 10:55 PM
  #18  
grendal's Avatar
Registered User
 
Joined: Jul 2000
Posts: 460
From: Houston, Texas, USA
Originally posted by windnsea00
man i wish mine was reliable as some of yours...i just got mine like 3 weeks ago...visually the exterior and interior are great...but just the other day the tranny started slipping and banging insane hard with only 90k miles...i also need new pads and rotors all around, new rack and pinon, tie rods, fix an oil leak (im guessing intake manifold)....if i need a whole new tranny...well im walking for a long *** time seeing that i owe my dad $3k still on the car and a whole new tranny goes for that....
How do you determine that you need a new rack & pinion?

-Michael
Old 02-23-2003 | 11:03 PM
  #19  
windnsea00's Avatar
Registered User
 
Joined: Feb 2003
Posts: 149
From: la jolla, ca
took it into a shop...my steering is creaking really bad...its been narrowed down to a damaged rack and pinon...i gotta have my tranny inspected this week...i just hope so much i dont need a new one
Old 02-23-2003 | 11:27 PM
  #20  
88irocz28's Avatar
Registered User
 
Joined: Apr 2000
Posts: 209
From: Jonesboro, AR
I got my 1994 Trans Am for $4600. Bought it in Florida. 100k miles, very strong motor, clean interior and exterior. No rattles or squeaks. Oh, and M6 too .
Old 02-24-2003 | 12:23 AM
  #21  
Dr.Mudge's Avatar
Registered User
 
Joined: Jan 2001
Posts: 2,148
From: Bay Area, CA
Originally posted by grendal
Comparing a turbo motor to a naturally aspirated motor is like comparing apples to bags of crack rock. Heh.
I'm not just talking turbo, I can take my 73 2.4L engine NA and dump 500 HP on it as well, it will take it just fine. That likewise has been done, later turbo top end thrown on an NA shortblock. An RB26DETT is an even better choice, for those with the dough, 6 throttle bodies and all the fixins for making 600+ horsepower on a 2.6L engine.
Old 02-24-2003 | 06:01 AM
  #22  
grendal's Avatar
Registered User
 
Joined: Jul 2000
Posts: 460
From: Houston, Texas, USA
Originally posted by Dr.Mudge
I'm not just talking turbo, I can take my 73 2.4L engine NA and dump 500 HP on it as well, it will take it just fine. That likewise has been done, later turbo top end thrown on an NA shortblock. An RB26DETT is an even better choice, for those with the dough, 6 throttle bodies and all the fixins for making 600+ horsepower on a 2.6L engine.
"...dump 500HP on it..."

hehe.. this needs a separate thread. I seriously call bullsh*t on a streetable 2.4L naturally aspirated on 70's technology making 500hp. Maybe on a road-race motor revving to 8,000-9,000rpm, but certainly not in any useable street form.

If you want to get into it, if you "throw a turbo top end" (i.e. lower compression, etc) on a Chevy 350 LT1 you can make some insane power. It's all about what the motor is built to do.... Put in forged components (which BTW, are not expensive for a 350 LT1 as they are shared with the venerable 350 SBC/Gen1), and the sky is the limit. Visit the drag strip sometime and see if Datsuns are the ones running 6's on street chassis.

-Michael
Old 02-24-2003 | 08:47 AM
  #23  
Dr.Mudge's Avatar
Registered User
 
Joined: Jan 2001
Posts: 2,148
From: Bay Area, CA
Originally posted by grendal
hehe.. this needs a separate thread. I seriously call bullsh*t on a streetable 2.4L naturally aspirated on 70's technology making 500hp. Maybe on a road-race motor revving to 8,000-9,000rpm, but certainly not in any useable street form.
No no no, not 500 HP NA, this is dumping a turbo setup on the car. My point is that other engines out there are alot more stout than what GM gave us in the 90s, which originates from a post that these engines are "insane" which is not exactly what I'd call these engines.

In the old days you saw more forged components but less internal balancing, I have forged internals and an internally balanced engine, usual teardowns show that everything is within .5g of each other. That is how efficient these were put together, way back when.

I love my V8, but in no way, shape or form did GM match that package.
Old 02-24-2003 | 09:57 AM
  #24  
GigaMp3z's Avatar
Registered User
 
Joined: Jul 2000
Posts: 123
From: Allentown-Quakertown-Whitehall-Pottstown, PA
Don't get a 3rd gen..get an early 4th gen. The price difference is not even worth it. Spend the extra few and get a 4th gen. My car has about 130,000 and its modded (check sig), still runs strong. You add some Hooker LT Headers, Offroad Y, cutout, RR's, drag radials/slicks your looking at high 12's, add a cam and gears your looking at mid 12's with good traction. The autos are quick (add a 2800-3200+ stall once you have headers, cam) and you will be running most likely better than the 6 speeds in the quarter. Get a 6 speed with gears and as long as you can drive your times will probably be equal with same mods (maybe a little slower), but your trapspeed in the quarter will be higher than an auto and and your highway acceleration will be better too with the 6 speed..

-Corey
Old 02-24-2003 | 11:05 AM
  #25  
Dr.Mudge's Avatar
Registered User
 
Joined: Jan 2001
Posts: 2,148
From: Bay Area, CA
The 3rd gen setup is great for making massive torque, unfortunately the T5 isn't all that robust. If you want HP you'd have to chnage the intake, or go LT1 since your on a budget, otherwise of course LS1 is king.
Old 02-24-2003 | 11:19 AM
  #26  
chesee48's Avatar
Registered User
 
Joined: Dec 2001
Posts: 3,674
From: Chicago, IL
Just be patient and you'll find a lt1 for around 5 grand...

good luck and welcome to the board!
Old 02-24-2003 | 11:29 AM
  #27  
Rog's Avatar
Rog
Registered User
 
Joined: Feb 2003
Posts: 27
From: Princeton, IL
Talking

My son just bought a really nice '93 for $5500. It has the infamous intake oil leak, but it's to be expected w/85K miles. We had been looking for some time before finding this '93. There are some deals are out there. Especially after a little snow.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dirtybird81
Fuel and Ignition
10
01-06-2015 09:31 PM
4586
Parts For Sale
0
12-31-2014 02:21 PM
AlaskaZ28
LT1 Based Engine Tech
1
12-10-2014 02:37 PM
chevroletfreak
LT1 Based Engine Tech
202
07-04-2005 05:00 PM



Quick Reply: Can a decent 4th Gen. Camaro be had for $5k?



All times are GMT -5. The time now is 10:38 AM.