cant find crane 10308 valvespring kit anywhere
10-12-2008, 05:17 PM
#1
Registered User
Thread Starter
Join Date: Nov 2007
Posts: 170
cant find crane 10308 valvespring kit anywhere
I'm right in the middle of my 383 build, and my mind was made up about using the crane 10308 kit, but I can't find it anywhere. Summit and Jegs don't have them in stock, and If I order it, they cant ship untill the 27th. and I don't want to wait 2 weeks.
Anybody know of an other place where I can find this kit?
OR...... give me part #s of different springs, retainers,locks,ect. (around a $200 budget)
I was considering the K-motion springs, but I read that they have too much seat pressure, and I've seen several posts about them breaking.
Thanks In Advance.
Anybody know of an other place where I can find this kit?
OR...... give me part #s of different springs, retainers,locks,ect. (around a $200 budget)
I was considering the K-motion springs, but I read that they have too much seat pressure, and I've seen several posts about them breaking.
Thanks In Advance.
10-12-2008, 06:38 PM
#3
Registered User
Thread Starter
Join Date: Nov 2007
Posts: 170
10-12-2008, 06:54 PM
#4
Registered User
Join Date: Apr 2006
Location: O'Fallon, MO
Posts: 1,083
10-13-2008, 01:32 PM
#7
Registered User
Join Date: Jul 1999
Location: Six Mile, SC, USA
Posts: 2,054
I have several sets of the PAC 1518s for $225 shipped. They are beehives like the 1218s but are good to .650 lift. If you want the locks/retainers/seats that can be had for $150 shipped.
The Crane 10308 are on order, just waiting....
The Crane 10308 are on order, just waiting....
10-13-2008, 09:43 PM
#8
Registered User
Thread Starter
Join Date: Nov 2007
Posts: 170
when do you think you'll have them?
10-14-2008, 09:20 AM
#10
Registered User
Join Date: Dec 1969
Location: PORTLAND, OR, MULTNOMAH
Posts: 3,499
Are they just out of the "kit"? Is so why don't you get the parts separately from the best priced outfit? That particular spring also comes in a step up version. Get the springs and then just order the retainers an locks separate. JMHO
10-14-2008, 09:31 AM
#13
Registered User
Join Date: Aug 2002
Location: Red Oak Texas
Posts: 1,509
The Patriot Gold Extreme springs would be the best choice BUT they will not work with SA rockers.
I would get PAC 1218 springs, Comp 795 retainers, 611 locks and 4705 locators as the next best thing and a set up that WILL work with SA rockers.
The Crane spring is a 99893 but by the time you buy the springs along with the retainers, locks and locators, you will probably be close to bee hive $$$.
The Crane 10308-1 kits will NOT work with SA rockers either. You would need a different retainer/lock set up for these to work.
Lloyd
I would get PAC 1218 springs, Comp 795 retainers, 611 locks and 4705 locators as the next best thing and a set up that WILL work with SA rockers.
The Crane spring is a 99893 but by the time you buy the springs along with the retainers, locks and locators, you will probably be close to bee hive $$$.
The Crane 10308-1 kits will NOT work with SA rockers either. You would need a different retainer/lock set up for these to work.
Lloyd
10-14-2008, 10:39 AM
#14
Registered User
Join Date: Dec 1969
Location: PORTLAND, OR, MULTNOMAH
Posts: 3,499
Why won't they work with SA rockers? I believe I have those springs along with my Crower 1.6 RRs. Is it because the retainers don't provide enough valve stem for the RRs to work with or what.
