Fatdog2

Maybe you o2 sensors are not getting hot enough to send info to the computer.read this somewhere.Might do a search.Hope this helps.(o2 heaters?).

raroz28

Doubt it.

You can unplug the o2's and the car will still run.

Since it's doing it all the time, I would recommend checking the fuel pressure. Get a cheap harbor freight gauge and connect it to the schrader valve on the back of the intake.

Report back with your results. You should be at about 43 PSI.

Pullngz

How did the car run BEFORE, the exhaust and opti/wires were installed?

Smith.justin51

Any luck fixing it? My cars doing the same thing.

weigh2fast4u

BUMP PLease. My car gets warm and just SHUTS off. no stubbling or any warning. like i reach up there and Turn the key off..... Ive changed three fuel pumps, and the ICM. summit is bringing me a new MSD coil today.... Ive been scratching my head for over a week now.

Injuneer

At any point have you scanned if for codes?

You need to add info to your signature... like year of the car.

weigh2fast4u

I haven't. will it throw a code without a light coming on?

weigh2fast4u

How much voltage should be at the wires going into the fuel tank? I can't find that on shbox

shoebox

If you mean to power the fuel pump, it's 12v. Yes, it is on shbox.

weigh2fast4u

Unplugged opti harness. Purple and white wire terminal was corroded. High resolution. hopefully it will run now thanks to some vinegar. we will see

Injuneer

Yas.

DTC 16, for loss of low resolution pulse signal from the cam position sensor in the Opti, does NOT turn on the SES light, but it shuts down the fuel system (pump and injectors).