LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

Coil Packs! How many & Locations?

Thread Tools
 
Search this Thread
 
Old 02-24-2007, 02:38 PM
  #16  
Registered User
 
JohnD's Avatar
 
Join Date: Jun 2000
Location: Austin, TX. USA
Posts: 451
I fought this same problem for over a year and finally traced it down to a single missing platinum puck on a _new_ #6 plug. Put the old plug back in and the problem vanished.
JohnD is offline  
Old 02-24-2007, 02:47 PM
  #17  
Registered User
Thread Starter
 
Red97LT1's Avatar
 
Join Date: Sep 2001
Location: Western North Carolina
Posts: 831
Checked the exhaust and I have some white smoke,but I don't smell antifreeze. I do here a puh,puh,puh,puh sound from the exhaust.(hope that makes sense) I also noticed some condensation inside the exhaust tips. It's around 50 degrees here and the car is at operating temp.
Red97LT1 is offline  
Old 02-24-2007, 02:56 PM
  #18  
Registered User
Thread Starter
 
Red97LT1's Avatar
 
Join Date: Sep 2001
Location: Western North Carolina
Posts: 831
Uh oh. I checked the oil cap and I have what appears to be dried chocolate milk in the cap. I also saw yellow looking foam in the oil fill neck. Could this be antifreeze eventhough dexcool is orange? Could the gasket be bad near that cylinder causing my problem?

Last edited by Red97LT1; 02-24-2007 at 02:59 PM.
Red97LT1 is offline  
Old 02-24-2007, 04:20 PM
  #19  
Registered User
 
97WS6SCharged's Avatar
 
Join Date: Nov 2002
Location: Jacksonville
Posts: 4,784
The chocolate milk in the valve covers is normal for aluminum heads. As long as the oil is oily, you should be ok.

Have you checked the water pump to see if it's weeping onto the opti? You mentioned losing coolant every few days.
97WS6SCharged is offline  
Old 02-24-2007, 04:29 PM
  #20  
Registered User
 
evilundisguised's Avatar
 
Join Date: Feb 2006
Posts: 302
I've never seen anything but oil in my valve covers, what does the head material have to do with it?

Originally Posted by 97WS6SCharged
The chocolate milk in the valve covers is normal for aluminum heads. As long as the oil is oily, you should be ok.

Have you checked the water pump to see if it's weeping onto the opti? You mentioned losing coolant every few days.
evilundisguised is offline  
Old 02-24-2007, 04:35 PM
  #21  
Registered User
 
97WS6SCharged's Avatar
 
Join Date: Nov 2002
Location: Jacksonville
Posts: 4,784
In cool weather, aluminum tends to cause more condensation. If you run the motor to operating temperature it will evaporate in a few minutes.
97WS6SCharged is offline  
Old 02-24-2007, 04:39 PM
  #22  
Registered User
Thread Starter
 
Red97LT1's Avatar
 
Join Date: Sep 2001
Location: Western North Carolina
Posts: 831
Originally Posted by 97WS6SCharged
The chocolate milk in the valve covers is normal for aluminum heads. As long as the oil is oily, you should be ok.

Have you checked the water pump to see if it's weeping onto the opti? You mentioned losing coolant every few days.
The old water pump was weeping onto the opti,that's why I had to replace it.What's the foam in my oil filler neck? I can't seem to find any leaks.

Last edited by Red97LT1; 02-24-2007 at 04:48 PM.
Red97LT1 is offline  
Old 02-24-2007, 04:47 PM
  #23  
Registered User
 
97WS6SCharged's Avatar
 
Join Date: Nov 2002
Location: Jacksonville
Posts: 4,784
Well, the first thing to do is find that coolant leak. I would hook up a tester to pressurize the cooling system and look for the obvious. I'm not sure what the yellow foam would be. Can you post a pic of it?
97WS6SCharged is offline  
Old 02-24-2007, 04:56 PM
  #24  
Registered User
Thread Starter
 
Red97LT1's Avatar
 
Join Date: Sep 2001
Location: Western North Carolina
Posts: 831
I'll try to get you one. I have tried to find a pressure tester,but nobody around here has one right now. Autozone has a rental,but it's out.
Red97LT1 is offline  
Old 02-24-2007, 05:04 PM
  #25  
Registered User
Thread Starter
 
Red97LT1's Avatar
 
Join Date: Sep 2001
Location: Western North Carolina
Posts: 831

Oil Filler neck cap.

looking inside oil filler neck.you can see some of it,but there is way more down the neck.

My wife has the good camera,so these pics are not the best.

Last edited by Red97LT1; 02-24-2007 at 05:09 PM.
Red97LT1 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Chet1185
Parts Wanted
3
03-15-2015 04:29 PM
Moshbmx1
Parts For Sale
1
01-20-2015 03:27 PM
CARdiac
Show and Shine / Paint and Body Care
4
11-28-2001 03:26 PM



Quick Reply: Coil Packs! How many & Locations?



All times are GMT -5. The time now is 05:43 PM.