Dart LT1 heads
#65
Ai working on CNC program for Dart LT1
Phil sent me a link to his lastest work on the bare Dart LT1 heads that I sent to him. Looks like we are now going to have more than a few heads to choose from for the LT1. (GM, TFS, AFR, Dart)
CNC Dart LT1 by Ai
Here is a photo of the Dart factory assembled head on an LT1 going in an Impala SS a few days from now.
Karl
CNC Dart LT1 by Ai
Here is a photo of the Dart factory assembled head on an LT1 going in an Impala SS a few days from now.
Karl
#66
wow 276 at .5.
Im droolin over here.
We are getting close to LS1 terrritory.
For comparison a very popular and very good performing head from TSP (stage 2.5 5.3) at 220cc flows 290 at .5.
And the LT1 Darts arent even done yet, awesome. Very Impressive for a 23* head
Im droolin over here.
We are getting close to LS1 terrritory.
For comparison a very popular and very good performing head from TSP (stage 2.5 5.3) at 220cc flows 290 at .5.
And the LT1 Darts arent even done yet, awesome. Very Impressive for a 23* head
#67
I'm interested in seeing the finished product, the 200's outflow them untill 500 lift so right now it looks like there won't be that much of a gain on a street car, but then again this is just going off flow #'s and not track #'s.
#68
give it some time guys......It takes a while to find good air. We just started getting good air from stock casting in the past few years.
With a little time I'm sure Ai (along with others) will find alot more out of these
With a little time I'm sure Ai (along with others) will find alot more out of these
#73
Yeah I know that it's just that everyones acting like these flow #'s at those lifts are something new. I am curious to see what they find out of the darts after some more developement though.
#75
You guys need to stop. I run decent, but would like to run quicker. On my wish list I already have a CPT trans, drive shaft, 12 bolt, 6-point bar, stronger bottom end, up the nitrous shot, and now, some heads that will really move some air, once the little tricks are found. Whats that, about another 14k to 15k? Please stop. LOL