Dynoing the Speed Secrets project car..
#1
Dynoing the Speed Secrets project car..
Took my car to the dyno today with 300 miles on the new combo...
Speed Secrets 401
Speed Secrets 4L60E
Strange 12 bolt 3.73 gears
PI 3200 (4100 Stall)
AFR 210's ported by Lloyd Elliot....thanks....
Some tech assit by Bret Bauer....thanks....
448 SAE rwhp/424 SAE rwtq
Here's some video.....
http://www.highspeedproducts.com/video/Jimbo.wmv
Jim
Speed Secrets 401
Speed Secrets 4L60E
Strange 12 bolt 3.73 gears
PI 3200 (4100 Stall)
AFR 210's ported by Lloyd Elliot....thanks....
Some tech assit by Bret Bauer....thanks....
448 SAE rwhp/424 SAE rwtq
Here's some video.....
http://www.highspeedproducts.com/video/Jimbo.wmv
Jim
#5
Re: Dynoing the Speed Secrets project car..
Hyd..
237/245 comp .608/.613
Oh yeah, I used "Howard springs" 175 verified seat pressure at 1.9 installed height and I believe 450ish over the nose "Stock Lifters" at 1/8 turn. Revs to 7100RPM no problem....
237/245 comp .608/.613
Oh yeah, I used "Howard springs" 175 verified seat pressure at 1.9 installed height and I believe 450ish over the nose "Stock Lifters" at 1/8 turn. Revs to 7100RPM no problem....
Last edited by jimbob65; 11-12-2005 at 09:07 AM.
#7
Re: Dynoing the Speed Secrets project car..
How well do those heads flow, I assume its through a Ported LT4 intake???
I like the cam choice I will have a Very similiar setup, but I will have a 10-bolt (good for dynoing it ) and a converted Super Vic from Bret Bauer. Care to elaborte more on your setup. That thing sounds like a monster, thought about a True duel setup??
Great Numbers BTW
I like the cam choice I will have a Very similiar setup, but I will have a 10-bolt (good for dynoing it ) and a converted Super Vic from Bret Bauer. Care to elaborte more on your setup. That thing sounds like a monster, thought about a True duel setup??
Great Numbers BTW
#9
Re: Dynoing the Speed Secrets project car..
Originally Posted by T/A KID
How well do those heads flow, I assume its through a Ported LT4 intake???
I like the cam choice I will have a Very similiar setup, but I will have a 10-bolt (good for dynoing it ) and a converted Super Vic from Bret Bauer. Care to elaborte more on your setup. That thing sounds like a monster, thought about a True duel setup??
Great Numbers BTW
I like the cam choice I will have a Very similiar setup, but I will have a 10-bolt (good for dynoing it ) and a converted Super Vic from Bret Bauer. Care to elaborte more on your setup. That thing sounds like a monster, thought about a True duel setup??
Great Numbers BTW
401, 12.5 to 1 compression, 237/245 comp cam .608/.613, AFR 210 heads ported by LE, PI 3200 (4100 stall), 58mm t-body, Hooker LT's, Strange 12 bolt 3.73 gears, Electric water pump, SLP dual dual with 5 inch bullet muffler in line and custom Y-pipe...
#12
Re: Dynoing the Speed Secrets project car..
Originally Posted by jimbob65
Hyd..
237/245 comp .608/.613
Oh yeah, I used "Howard springs" 175 verified seat pressure at 1.9 installed height and I believe 450ish over the nose "Stock Lifters" at 1/8 turn. Revs to 7100RPM no problem....
237/245 comp .608/.613
Oh yeah, I used "Howard springs" 175 verified seat pressure at 1.9 installed height and I believe 450ish over the nose "Stock Lifters" at 1/8 turn. Revs to 7100RPM no problem....
#13
Re: Dynoing the Speed Secrets project car..
Originally Posted by A/G
Kinda shoots holes in what has been considered the pressure limit for OEM lifters.
That's what I'm talking about!
Very impressive combination you have there.
Dean
#14
Re: Dynoing the Speed Secrets project car..
Originally Posted by jimbob65
Thanks....No thank you....
Still think I could get 10 more hp with one of your cams...
Still think I could get 10 more hp with one of your cams...
Bret
#15
Re: Dynoing the Speed Secrets project car..
Originally Posted by SStrokerAce
I'd have to look at it but you know me, what you think I'm going to say?
Bret
Bret
Thanks again for tech assit....We'll make it up to ya!