Few Question on NOS and a rebuilt motor with a CC305
#1
Registered User
Thread Starter
Join Date: Dec 2000
Location: Home: Roseville, CA School: Chico, CA
Posts: 407
Few Question on NOS and a rebuilt motor with a CC305
I'm getting my motor rebuild right now and I'm thinking about putting a kit once I pay off the new motor. I have heard the kit acts well with the CC305 (that I already have). I'm was looking at the Zecs (sp?) kit. Any recammendations??
Also well I have the motor apart is there anything I absoulty should buy if I'm thinking of NOS, I was thinking completely stock rebuild would be fine since it is new.
Just thinking and doing the research....
Also well I have the motor apart is there anything I absoulty should buy if I'm thinking of NOS, I was thinking completely stock rebuild would be fine since it is new.
Just thinking and doing the research....
#2
Stock rebuild? As in stock pistons?
I'd skip that plan and at least use a forged piston. If you're going real light on the nitrous, a KB hypereutectic would also be a good choice over stock.
I don't no about all the new companies making nitrous kits. Personally I'd stay with NOS, Top Gun or one of the more reputable makers.... then again, I've been out of the bottle games for some time, so take this with a grain of salt.
Best bet, query the Nitrous Forum and see what guys are running on these cars.
-Mindgame
I'd skip that plan and at least use a forged piston. If you're going real light on the nitrous, a KB hypereutectic would also be a good choice over stock.
I don't no about all the new companies making nitrous kits. Personally I'd stay with NOS, Top Gun or one of the more reputable makers.... then again, I've been out of the bottle games for some time, so take this with a grain of salt.
Best bet, query the Nitrous Forum and see what guys are running on these cars.
-Mindgame
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
FilledWithFurySS
Automotive News / Industry / Future Vehicle Discussion
5
07-26-2002 02:00 PM