First time out w/the 396, LE2/4 Setup
#31
Re: First time out w/the 396, LE2/4 Setup
Originally Posted by Compstall
How'd you get a Nutek motor? Maybe I've been out of it for awhile but I thought that company went under.
When I got the car, it had Pro Performance (some of the long time members will remember those pieces of work) heads on it. I pulled those POS heads off and put some LE2 heads with an LE4 cam, ported intake, etc. on the car. I've done quite a bit of work/tuning on it in the past year to get it where it is today.
#32
Re: First time out w/the 396, LE2/4 Setup
Originally Posted by Sweetred95ta
I had to go down with mine. I spun at 17 and 16 psi and I finally just let them down to 12 and it dead hooked for a 1.53 60 ft with a completely stock suspension.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
Lt1son
Drivetrain
1
12-31-2014 01:35 PM