nodnarb481

I am trying to put together a list of parts to do a cheap yet efficient 1.6 Roller Rocker upgrade and i came across these...

http://cgi.ebay.com/ebaymotors/LT1-V...QQcmdZViewItem

ARe they any good? and would that be a good deal? After that what else would i need to run 1.6 Self aligning rockers on a pretty much stock engine?

I did a search and most parts lists were intimidating and looked to be for bigger plans then i have so thats why im posting...

thanks

Bow94z

some ppl on here dont know much bout the Proform rockers..most are just Comp Cam or Crane fans
with 1.6 rockers you will need to upgrade ur valve springs to LT4s if you dont plan on cammin the car

I actually just got buyin everything to do the swap on my car..i bought Crane Rockers off a member on here, and bought all the springs and other stuff from work...then i bought the expensive crane tool to swap out the springs

http://web.camaross.com/forums/showt...hlight=rockers

joeSS97

Aluminum rockers are prone to breaking...sooner or later.Comp Pro Mags arent that much more $.Trust me.

formula-bird

I have them on my car and have had no proplem's with them.

96 mikez28

My bet is that you'll be after a cam sooner or later, so i'd do it right the first time with promags and good spings etc.

KillWhitey

You will be happy with them

nodnarb481

if i got these... http://www.compperformancegroupstore...y_Code=RAKRCKR

i would just need springs then right? Someone is trying to sell me Comp 987 Springs with retainers and locks for $55 shipped. Would those be good with these?

speed_demon24

One thing that I would NEVER buy used is springs, I'de just get new LT4 springs if I were you.

Bow94z

http://www.sdpc2000.com/ they got good deal on LT4 Springs/locks/retainers

or call Dal or jason Cromer

Get Valve Seals aswell

nodnarb481

so Lt4 springs locks and retainers would do fine for just 1.6 self aligning roller rockers? I really dont think im going to be doing a cam anytime for at the next four years (college) and im just trying to get some nice added power

Bow94z

yup Lt4 Springs and SA 1.6 Rockers will do just fine

nodnarb481

nice because im a poor mother ****er with 12 second dreams..

I guess ill get on creating my parts list.. good thing i picked up an extra shift

nodnarb481

to the top.. wanna see if i can squeeze a little more advice outta this thread..

Im being offered Self Aligning 1.6 Scorpion rockers for $200.. good deal?

Also how do the rockers from the hotcam compare to others?

nodnarb481

also i was offered these as a package with 3k? think thats a safe idea or is it bad to buy springs with that many miles?

kmotion k-800 dual valvesprings, comp 10* locks and locators and comp ti-retainers

nodnarb481

I think im just gonna go with the lt4 springs etc and try to find a good deal on some good rockers.. whats the difference between promags and mags?