Help with motor mounts!
#16
Re: Help with motor mounts!
thats what I did, with the longtubes already in. the car only had 50k on it at the time, and the mounts were good. Well, after 6 months not so much, so I had to swap them out. It would have been much easier on the passenger side had the header not been there. The drivers side didnt matter, I just popped off the steering linkage. All together, about 8 hours of *** pain. That includes time grinding and drilling those damn rivets out too though.
#17
Re: Help with motor mounts!
Originally Posted by GreenZLT1
Do you guys think it is feasible to change the motor mounts with longtubes installed on the car?
#18
Re: Help with motor mounts!
I did my motor mounts with everything in there. It's not necessarily the easiest way of doing it but it works out just fine. Just have a way of lifting and lowering the engine easily to make putting the bolt in easy. If you can move the engine around the bolt will slide in like butter if you clean out the through hole.
Thread
Thread Starter
Forum
Replies
Last Post