How much Hps out a hotcam kit?
#1
How much Hps out a hotcam kit?
I took my car to go get tune today on a mustang dyno and was wondering if my number were pretty good or not from just a hotcam kit? First try it was at 280hps then after spending the whole day we got it at 300hps with a perfect A/F. Are these # right? I'll try to post dyno sheet but what do you guys think? would like to know what other hotcam people got in there dyno and track time aswell.
#4
Re: How much Hps out a hotcam kit?
I am guessing its a 96-97?, either way that seems a bit lower than average, perhaps its the shorties holding you back, but with just bolt on's you should pulling over 280. Is this car a A4 or M6?
-Dustin-
-Dustin-
#9
Re: How much Hps out a hotcam kit?
Originally Posted by SoloExceptional
Mustang Dyno's read higher to boost mustang owners confidence?
#10
Re: How much Hps out a hotcam kit?
They read lower because they claim they put more load on the "treadmill" to simulate the actual road. Don't think "mustang" in the name mustang dyno actually has anything to do with ford, just horsepower... i.e.
#13
Re: How much Hps out a hotcam kit?
wow i feel cheatd. i got a 94z a4 with 355, lt4 h/c kit,mac mids,slp loudmouth,lt4 km,3.23 gears and stock converter. i only put down 290rwhp, and around 315rwtq.and got shut down around 5,000rpms because my air fuel ratio was shakey around 12.8/1.
#14
Re: How much Hps out a hotcam kit?
Originally Posted by slowZ
wow i feel cheatd. i got a 94z a4 with 355, lt4 h/c kit,mac mids,slp loudmouth,lt4 km,3.23 gears and stock converter. i only put down 290rwhp, and around 315rwtq.and got shut down around 5,000rpms because my air fuel ratio was shakey around 12.8/1.
Fix your car and do it again!
#15
Re: How much Hps out a hotcam kit?
Originally Posted by slowZ
wow i feel cheatd. i got a 94z a4 with 355, lt4 h/c kit,mac mids,slp loudmouth,lt4 km,3.23 gears and stock converter. i only put down 290rwhp, and around 315rwtq.and got shut down around 5,000rpms because my air fuel ratio was shakey around 12.8/1.
My ZZ3 cammed with 1.5 rockers Caprice put down 260hp with heavy drivetrain(steel driveshaft tires/wheels are about 62lbs apiece, 11" drums), 87 octane mailorder tuning modified stock intake(3" pvc), stock manifolds and cats this was on a Superflow which is also supposed to read lower than a Dynojet not sure how they compare to Mustang. Oh and a Edge 2800 stall which did lighten things up a bit. Could not get peak torque due to downshifting.