LE2 H/C/I is finished!
#31
You guys are a bad influence . The oil is changed and I'm already beating on it. I changed the TPS and the idle went down a little, but it's still high and RPMs come down kinda slow with the clutch in. Hopefully I get it running right so I can go get it dynoed this week.
#33
This sounds like the deal we have around here. IRP (or now known as ORP) is home of the US Nationals in Indy. Actually the race park is in a little town called Clermont. The catch is, Clermont has been "incorporated" into Indy, but still has it's own local government body.
And to keep this on topic, I have a ? for SS RRR. Please don't take this the wrong way, but how do the marks or wear patterns get on the cam lobes if there isn't any contact ? Maybe I just misunderstood the explanation in your post but, I'm kinda confused now I do understand why (kinda) there isn't a "break in" period for the HR cams though.
It's not. No "mating" necessary. If something were to break it would have to be blamed more on the component. Bearings, roller bearings and journals all have a layer of oil between them to eliminate friction. There should never be physical contact with a journal to bearing surface. Just sayin' for those who may think it's necessary....
#34
Yep, slotted it and it's at exactly .67 volts. Changing the TPS actually dropped the idle a bit, I think the other one was bad (came with the bigger TB).
#35
And to keep this on topic, I have a ? for SS RRR. Please don't take this the wrong way, but how do the marks or wear patterns get on the cam lobes if there isn't any contact ? Maybe I just misunderstood the explanation in your post but, I'm kinda confused now I do understand why (kinda) there isn't a "break in" period for the HR cams though.
#37
Perhaps "eliminate" is a wrong choice of words. More like oil greatly reduces friction on the cam lobes. Wear patterns from a hydraulic roller lifter are generated more from a cold start up than at any other time during engine operation. Because you are dealing with a roller bearing which rides on the lobe there is no reason to "seat" or "break in" a cam lobe and lifter like in the days of old.
#38
High idle is fixed. Unfortunately, the track and dyno will have to wait, now my clutch MC is acting up again . Clutch won't disengage all the way, making it incredibly hard to shift. I already shelled out the cash for a McLeod adjustable MC (I'm not taking the chance of breaking another stocker), so hopefully it gets here and I can get it installed by this weekend.
#40
I adjusted the idle screw, reset the TPS, and sprayed out the TB with some carb cleaner (I bought it used, and I guess the blades were sticking open a little). Still whistles though, so that's next on my list.
#41
Glad I could help. It should also be added that everything experiences friction and over time parts will wear out because of friction. If there was no such thing then parasitic losses would be non-existent.
Thread
Thread Starter
Forum
Replies
Last Post
CARiD
Supporting Vendor Group Purchases and Sales
0
09-30-2015 05:44 AM