A little cam video of mine
#16
Are a lot of people lately putting cams in a stock motor without any problems? Seems like before people were doing this and the motor would be trashed a couple of weeks later.
How did your front cam bearing look?
How did your front cam bearing look?
#17
didnt really look at it. just put it aside and put the new one in
#19
i put a cc306 in my stock motor with ~144-145K miles and i have about 148or 149K now
#20
When I did mine, the front one looked a little worn, and the stock motor only had 28k on it. I did replace the water pump with an electric one to take some load off that bearing. So far so good.
#21
i like my 3.42's it pulls right to redline super quick. the 4.10's are suppose to keep the rpm up real high where the cam makes the most power. but with stock heads i make my power a little lower.
drives real good on the street, no bad surge or anything.
smaller next time??? not a chance
drives real good on the street, no bad surge or anything.
smaller next time??? not a chance
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
02-26-2015 02:10 PM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
01-29-2015 07:10 PM