mallory 685 harness wires not same color
#16
Ok give me a minute, I know the green goes to green, red to red. Green is tach signal, and red is 12 volt power from key. the other two are coil + and -. Let me figure out which is which and I'll get back to ya.
#24
Looking at this,
http://www.malloryperformance.com/pdf/29068.pdf
and your harness, what colors are the four spade connector wires on your harness that you bought? Are they red,green black and yellow or red green pink and white?
http://www.malloryperformance.com/pdf/29068.pdf
and your harness, what colors are the four spade connector wires on your harness that you bought? Are they red,green black and yellow or red green pink and white?
#26
So, just so I keep myself straight,( gonna be 55 in july and I get confused real easy) on the harness, the plug that goes into the coil, are those wires pink and white also? Never mind, you already stated they were pink(with black stripe) and white.
Last edited by MichiganSkip; 05-10-2008 at 01:42 PM.
#28
The white hooks into the black and the pink hooks into the yellow on your box. the red hooks to red and green to green.
Here's how I decided that's how to hook it up.
See page 14 for MSD Orange/Black to Pink/White conversion
The Pink and White wires are the original coil wire colors
http://www.msdignition.com/pdf/6%20series/6series.pdf
MSD to Mallory conversion
(MSD)Red to (MALLORY)Red
(MSD)Black to (MALLORY)Black
(MSD)White to (MALLORY)Green
(MSD)Orange to (MALLORY)Yellow
Go here for a pin-out of the Mallory 29068
http://www.malloryperformance.com/pdf/29068.pdf
We know to hook the Red to Red, and Green to Green
We know from http://www.msdignition.com/pdf/6%20series/6series.pdf page 14 that the MSD Black hooks to the where the white wires WERE on the coil
We know that on the MSD to Mallory conversion thathooks Black to Black Which leaves only the Yellow wire on your Mallory harness
So here’s the revised MSD to Mallory Harness conversion
(MSD)Red to (MALLORY)Red -------(Red)
(MSD)Black to (MALLORY)Black-------(White)
(MSD)White to (MALLORY)Green------(Green)
(MSD)Orange to (MALLORY) Yellow-----(Pink)
Here's how I decided that's how to hook it up.
See page 14 for MSD Orange/Black to Pink/White conversion
The Pink and White wires are the original coil wire colors
http://www.msdignition.com/pdf/6%20series/6series.pdf
MSD to Mallory conversion
(MSD)Red to (MALLORY)Red
(MSD)Black to (MALLORY)Black
(MSD)White to (MALLORY)Green
(MSD)Orange to (MALLORY)Yellow
Go here for a pin-out of the Mallory 29068
http://www.malloryperformance.com/pdf/29068.pdf
We know to hook the Red to Red, and Green to Green
We know from http://www.msdignition.com/pdf/6%20series/6series.pdf page 14 that the MSD Black hooks to the where the white wires WERE on the coil
We know that on the MSD to Mallory conversion thathooks Black to Black Which leaves only the Yellow wire on your Mallory harness
So here’s the revised MSD to Mallory Harness conversion
(MSD)Red to (MALLORY)Red -------(Red)
(MSD)Black to (MALLORY)Black-------(White)
(MSD)White to (MALLORY)Green------(Green)
(MSD)Orange to (MALLORY) Yellow-----(Pink)
Last edited by MichiganSkip; 05-10-2008 at 01:47 PM.