v8 FC

OK i have a mazda rx7 that i put an LT1, i am having a bitch of a time doing the wiring. i can't get fuel to pump out of the injectors. so i was thinking about going carb. so what i wanted to ask is it worth it to go carb and sell all my brand new FI stuff i have and go carb? or should i stick with the fight and figure out my injector wiring? let me know whats up

razor02097

are you using an LT1 wire harness?

Mikek340

That is a good question. If you use an entire setup from a lt1 conversion then it shouldn't be that bad to diagnos.

CamaroRacing12

either way that car is gonna fly

v8 FC

thanks guys. yeah i am using an lt1 harness for a 6 speed. it needs some clips but its for the o2 sensors and for the coolant temp sensor i can add those later i just want to hear my car start and stay on for more then 2 seconds

MysticTeal95Z28

What year is the RX-7? Do you have any pics, sounds like an interesting project.

Dave89IROC

did you get the VATS programed out of the PCM?

v8 FC

http://ls1tech.com/forums/showthread.php?t=596709
there is the link for my project i thought i had it posted here but i guess not
that is my next thing to check. i did send my ecu out to get flashed and he told me he turned it off but i am not sure. so my next cry is if anyone lives in my area that is willing to lend me there ecu or if they can test my ecu i would greatly like that . i am going to make a post on it to see if anyone can help me out