CamaroZ28.Com Message Board

LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

PAC Beehives on LT1

Thread Tools
 
Search this Thread
 
Old 03-24-2008, 06:16 PM
  #16  
Registered User
 
dangalla's Avatar
 
Join Date: Jun 2006
Location: lakeville, pa
Posts: 2,092
i think these are the right pushrods, but you should measure them

http://store.summitracing.com/partde...0&autoview=sku
dangalla is offline  
Reply
Old 03-24-2008, 06:19 PM
  #17  
Registered User
 
dangalla's Avatar
 
Join Date: Jun 2006
Location: lakeville, pa
Posts: 2,092
Originally Posted by 19z28camaro02
Thanks, you're definately one of the most knowledgeable on the boards here.
hardly, everything i know i learned here

but good luck with it and make sure you return the favor by helping someone else here one day
dangalla is offline  
Reply
Old 03-24-2008, 08:43 PM
  #18  
Registered User
Thread Starter
 
19z28camaro02's Avatar
 
Join Date: Oct 2004
Location: La Porte, IN
Posts: 833
I will, knowledge should be free.
19z28camaro02 is offline  
Reply
Old 03-24-2008, 08:51 PM
  #19  
Registered User
Thread Starter
 
19z28camaro02's Avatar
 
Join Date: Oct 2004
Location: La Porte, IN
Posts: 833
I just realized that you have LE2 heads, I have stock. This all gunna work right?
19z28camaro02 is offline  
Reply
Old 03-25-2008, 07:40 AM
  #20  
Registered User
 
dangalla's Avatar
 
Join Date: Jun 2006
Location: lakeville, pa
Posts: 2,092
Originally Posted by 19z28camaro02
I just realized that you have LE2 heads, I have stock. This all gunna work right?
yes they will work, i have no idea how to set up installed height though and you are gonna need to figure that out because it is very important
dangalla is offline  
Reply
Old 03-25-2008, 08:02 AM
  #21  
Registered User
Thread Starter
 
19z28camaro02's Avatar
 
Join Date: Oct 2004
Location: La Porte, IN
Posts: 833
schwing
19z28camaro02 is offline  
Reply
Old 03-25-2008, 10:27 AM
  #22  
Registered User
 
94zgreenmachine's Avatar
 
Join Date: Feb 2004
Location: Oshkosh, Wisconsin
Posts: 1,309
Originally Posted by dangalla
yes they will work, i have no idea how to set up installed height though and you are gonna need to figure that out because it is very important
Pac 1218 springs at 1.750 (145 lbs on seat and 350 lbs open, good for 600-.610 lift)
94zgreenmachine is offline  
Reply
Old 03-25-2008, 03:38 PM
  #23  
Registered User
Thread Starter
 
19z28camaro02's Avatar
 
Join Date: Oct 2004
Location: La Porte, IN
Posts: 833
Mucho Gracias!
19z28camaro02 is offline  
Reply
Old 03-25-2008, 09:45 PM
  #24  
Registered User
 
marshall93z's Avatar
 
Join Date: Feb 2003
Location: Mooresville, NC
Posts: 2,640
Originally Posted by 94zgreenmachine
Pac 1218 springs at 1.750 (145 lbs on seat and 350 lbs open, good for 600-.610 lift)
I think mine were 140/340. Could have been differences in scales.
marshall93z is offline  
Reply
Old 03-26-2008, 02:29 AM
  #25  
Registered User
 
94zgreenmachine's Avatar
 
Join Date: Feb 2004
Location: Oshkosh, Wisconsin
Posts: 1,309
Originally Posted by marshall93z
I think mine were 140/340. Could have been differences in scales.
Was yours at 1.80 installed. That was how Lloyd use to set them at but now goes with 1.75
94zgreenmachine is offline  
Reply
Old 03-26-2008, 11:21 AM
  #26  
Registered User
 
marshall93z's Avatar
 
Join Date: Feb 2003
Location: Mooresville, NC
Posts: 2,640
1.75
marshall93z is offline  
Reply
Old 03-26-2008, 12:01 PM
  #27  
Registered User
 
9formula4's Avatar
 
Join Date: Mar 2006
Location: Iowa
Posts: 269
wait! dont the heads need machine work to work on the LT1 heads?? I am pretty sure I read that somewhere. They are not a direct fit spring.
9formula4 is offline  
Reply
Old 03-26-2008, 12:04 PM
  #28  
Registered User
 
dangalla's Avatar
 
Join Date: Jun 2006
Location: lakeville, pa
Posts: 2,092
Originally Posted by 9formula4
wait! dont the heads need machine work to work on the LT1 heads?? I am pretty sure I read that somewhere. They are not a direct fit spring.
they fit just fine
dangalla is offline  
Reply
Old 08-27-2008, 02:26 AM
  #29  
Registered User
 
94adamz28's Avatar
 
Join Date: Jul 2008
Posts: 57
Originally Posted by ChevalierSS
4705-16 locators
795-16 retainers
614-16 locks

all Comp Cam part numbers
Just bought pac 1218 valve springs, will these parts work with my pac springs also, thanks.
94adamz28 is offline  
Reply
Old 08-27-2008, 02:37 AM
  #30  
Registered User
 
DelSoto's Avatar
 
Join Date: Sep 2000
Location: Stillwater Ok USA
Posts: 574
Originally Posted by 94adamz28
Just bought pac 1218 valve springs, will these parts work with my pac springs also, thanks.

PAC 1218 are beehive springs and yes those parts will work.
DelSoto is offline  
Reply



Advanced Search
Quick Reply: PAC Beehives on LT1


Reply Closed Thread Share

All times are GMT -5. The time now is 08:58 PM.