Rob1997ta

With all the mods I have now what do you guys and gals think would be the next mod??? I want something that when I install it I will be able to tell the difference.. Thanks guys for any help you can provide..

Josh'95Z28conv

Cam and/or stall converter, plus tune.

Rob1997ta

What size converter would be good for my vehicle???

bombebomb

I believe about a 3k for a stock cam car would be nice, see what others say though.

Josh'95Z28conv

Size your converter to your cam. Do them both at once

Counted Out

How much are you looking to spend?

It can vary alot.

But if you do have enough money to drop, +2 on the Converter and Cam + Tune.

2000GTP

Yeah, anywhere from a 2800-3200 stall would work out good on a stock/bolt-on car. It would also be a good idea to install an auxillary tranny cooler as well.

Rob1997ta

I was thinking a Tune and a torque converter... I was thinking a fuddle what do you guys think???

2000GTP

Fuddle is a pretty good brand and decently priced.

Rob1997ta

Is there anything inportant I need to know to install a aftermasket trans fluid cooler???

kanetank

+1 cam & tune

2000GTP

Nothing too intense, Brent had a writeup on the process: http://www.bfranker.badz28.com/94Z/trannycooler.htm

3DFORMULA

A couple suspension pieces with some sticky tires would help you be fast, not just powerful. You would feel the difference there and notice it on the timeslip.

bacatrane

custom ground cam by Ai or Bret Bauer along with a new converter...

bombebomb

I know iv already said converter, however after that you might look into some drag radials and some lower control arms, did wanders(sp) for my car.