Progress update on the BLAKHOL
#16
Re: Progress update on the BLAKHOL
Originally Posted by NJLT1SS
Thats going to be a really sweet ride when its done, congrats! Can you divulge any more info on that Wilson intake? I see that its a cast piece, have they produced a few of them? Looks like they designed it with 4th gens in mind, with that step on the roof of the intake so it just fits under the cowl, and it uses a GM style dual bore throttle body, where they usually use a single bore LS1 type. Any info would be great!
Nick
Nick
It is a "one of" custom piece that Keith did for me. I had him step it down to fit.
For in excess of 3500 he will build ya one.
"O" he said it will outflow one of "his" Super Victor's.
Last edited by 1racerdude; 07-04-2006 at 07:48 PM.
#17
Re: Progress update on the BLAKHOL
Originally Posted by NJLT1SS
Thats going to be a really sweet ride when its done, congrats! Can you divulge any more info on that Wilson intake? I see that its a cast piece, have they produced a few of them? Looks like they designed it with 4th gens in mind, with that step on the roof of the intake so it just fits under the cowl, and it uses a GM style dual bore throttle body, where they usually use a single bore LS1 type. Any info would be great!
Nick
Nick
I did the measuring with the stock intake in the car, it JUST clears the cowl, it actually touches it, we will have the make room for it to move. That it the only intake like it.....no others exist. The whole top 1/2 of the manifold was fabbed by Wilson.....it is truly a work of art.
David
#18
Re: Progress update on the BLAKHOL
Wow, that intake is a bad *** piece! He should consider making a short run of these intakes, I bet he would sell a few, and it would drop the price some. He fabbed the whole top half of the intake? Very interesting..... did the base start off as a production cast piece that he modified? Either way, its very cool, and sounds like it will work even better! Cant wait to see what kind of power it puts down. What RPM do you intend to spin the motor? Stock PCM?
Nick
Nick
#19
Re: Progress update on the BLAKHOL
Originally Posted by NJLT1SS
Wow, that intake is a bad *** piece! He should consider making a short run of these intakes, I bet he would sell a few, and it would drop the price some. He fabbed the whole top half of the intake? Very interesting..... did the base start off as a production cast piece that he modified? Either way, its very cool, and sounds like it will work even better! Cant wait to see what kind of power it puts down. What RPM do you intend to spin the motor? Stock PCM?
Nick
Nick
If that don't work then FAST will be getting a call.
That intake is WAY to big for a set of stock castings,my heads are Pro Action converted.
#20
Re: Progress update on the BLAKHOL
Originally Posted by NJLT1SS
Wow, that intake is a bad *** piece! He should consider making a short run of these intakes, I bet he would sell a few, and it would drop the price some. He fabbed the whole top half of the intake? Very interesting..... did the base start off as a production cast piece that he modified? Either way, its very cool, and sounds like it will work even better! Cant wait to see what kind of power it puts down. What RPM do you intend to spin the motor? Stock PCM?
Nick
Nick
I doubt it would drop the price, Wilson is a bad *** place to get custom stuff, places like those dont lower prices. If it did come to pass where they made some they would all gape your wallet.
Not many would have engine to put under it to take advantage of the intake. This is a "max effort" kinda peice, might as well get a sheetmetal built, it would cost the same.
David
#21
Re: Progress update on the BLAKHOL
Originally Posted by NJLT1SS
Thats going to be a really sweet ride when its done, congrats! Can you divulge any more info on that Wilson intake? I see that its a cast piece, have they produced a few of them? Looks like they designed it with 4th gens in mind, with that step on the roof of the intake so it just fits under the cowl, and it uses a GM style dual bore throttle body, where they usually use a single bore LS1 type. Any info would be great!
#22
Re: Progress update on the BLAKHOL
Originally Posted by James Montigny
Yeah, I didn't see it on their site anywhere.
I think I hold a patent on that one. Like I said it is a one of.
I can have ya one made if ya want.
Last edited by 1racerdude; 07-04-2006 at 10:33 PM.
#23
Re: Progress update on the BLAKHOL
Originally Posted by 1racerdude
I think I hold a patent on that one. Like I said it is a one of.
I can have ya one made if ya want.
I can have ya one made if ya want.
That is awesome man.
$3500 may be a bit steep for the gains with my current mods, but maybe later on
I'm no stranger to custom setups, I have a feeling we will be talking sometime soon
<-- my old car
Last edited by user 647483; 07-04-2006 at 10:38 PM.
#24
Re: Progress update on the BLAKHOL
Originally Posted by James Montigny
LOL, I just read the rest of the thread.
That is awesome man.
$3500 may be a bit steep for the gains with my current mods, but maybe later on
I'm no stranger to custom setups, I have a feeling we will be talking sometime soon
<-- my old car
That is awesome man.
$3500 may be a bit steep for the gains with my current mods, but maybe later on
I'm no stranger to custom setups, I have a feeling we will be talking sometime soon
<-- my old car
#25
Re: Progress update on the BLAKHOL
Originally Posted by 1racerdude
Ya would need a GOOD set of heads to justify the expense and make it worth it.
The temptation bug is biting at me already and I haven't even got em bolted down yet.
#26
Re: Progress update on the BLAKHOL
Originally Posted by James Montigny
Exactly, someday I will outgrow my LE2s
The temptation bug is biting at me already and I haven't even got em bolted down yet.
The temptation bug is biting at me already and I haven't even got em bolted down yet.
Those 2's will get ya going good if ya got it built right.
Thread
Thread Starter
Forum
Replies
Last Post
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
09-14-2015 09:20 AM
cmsmith
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
08-27-2015 06:37 PM
PFYC
Supporting Vendor Group Purchases and Sales
2
08-24-2015 06:41 AM
cmsmith
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
08-20-2015 07:57 PM