Project LT1 503 cam
#17
Sounds so familiar. Bought mine for 2k, full suspension, ewp, crane 1.6rrs and catback but has a blown motor. So i decided to go the "cam only" route using a 503. Previous best was a 13.4@105.
Good work and keep us updated.
Good work and keep us updated.
#20
Well we ran it this morning.....track was crappy, and we ran it on a stock tune.
12.55 @ 110.7 8.01@ 89 in the 660
Not bad but we lost 60' so If we can get that back we should go faster.
Exaust is really choking it, needs longtubes,gears and a bigger converter. I think it will go 11's cam only. Not so sure if a tune will pick it up any or not.....
Either way it has some more in it
12.55 @ 110.7 8.01@ 89 in the 660
Not bad but we lost 60' so If we can get that back we should go faster.
Exaust is really choking it, needs longtubes,gears and a bigger converter. I think it will go 11's cam only. Not so sure if a tune will pick it up any or not.....
Either way it has some more in it
#24
:I just read the first post:
The car can go LOW 12s and upper 11s if you work on it.
I put the HOT cam into the upper 11's
:read some more:
I can send you a tune to upload just to try, have had good luck with it locally :-)
Are you running an A3 or A4? Probably going to need a 3500ish GOOD TC and of course, the lower weight the better.
The car can go LOW 12s and upper 11s if you work on it.
I put the HOT cam into the upper 11's
:read some more:
I can send you a tune to upload just to try, have had good luck with it locally :-)
Are you running an A3 or A4? Probably going to need a 3500ish GOOD TC and of course, the lower weight the better.
Last edited by Shon Herron; 03-29-2008 at 08:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM