ran 12.9 but trapping 112.95mph!
#16
Re: ran 12.9 but trapping 112.95mph!
Originally Posted by fireman
I have several low 1.8 passes on my 4.10'd 10 bolt with stickies and a 6 spd.
I dump it at 3500rpm and floor it.
I saw a guy at the track with a '95 T/A that looked pretty stock on the outside and it was 2900lbs with driver. He had an old school carbed 350 in it though.
Check sig for my times.
I dump it at 3500rpm and floor it.
I saw a guy at the track with a '95 T/A that looked pretty stock on the outside and it was 2900lbs with driver. He had an old school carbed 350 in it though.
Check sig for my times.
#18
Re: ran 12.9 but trapping 112.95mph!
you will be running right around the times in my sig.
i run 4.10s in a stock 10 bolt witha spec stage III and 16" bfg drag radials. i usually leave around 3500 and slip the clutch a little. a little trick is to always keep the drivetrain loaded. i have prolly 50 or so passes like that.
i run 4.10s in a stock 10 bolt witha spec stage III and 16" bfg drag radials. i usually leave around 3500 and slip the clutch a little. a little trick is to always keep the drivetrain loaded. i have prolly 50 or so passes like that.
#19
Re: ran 12.9 but trapping 112.95mph!
you live in eagan ScreamnChicken, we should hook up and go drag racing sometime man. Are you apart of the mnfbody club?? As far as my car, i plan on putting her on a little bit of a diet, and just practicing this year (also praying to every god that there is in hoping the rear end will hold together). I am already putting away for a 12-bolt right now so that if she were to let go in the middle of the summer, i wouldn't be completely screwed. I really appreciate all the posts guys..thanks!!
trav
trav
Thread
Thread Starter
Forum
Replies
Last Post