Kreinmc

Me and a friend are trying to tune a 396 stroker 236/242 XE stage 3 heads with FAST. The timing table was messed up bad and was missing horribly. We have since done alot of tuning while driving and it has made a big difference but still has a little miss when we floor it. The car has 11:1 compression and it is going to be running on 91 octane. If you have a decent timing table that makes good power and drivability please post it here.

385LT1

here ya go have at it.........

http://www.abrinoperformanceengineer...S%20385%20LT1/

Kreinmc

How do i view these files? What octane gas are you running and what is your compression ratio?

96z

I have a 383 running 11.1 and using 93 octane gas. What program do u use to tune? Id rather email my tune than post the tables.

97bowtie

Can you send the timing tables to kreinmc? Has your car ran with this tune? If so how does it run? They are using F.A.ST. to tune the car.

96z

Im not using FAST. I just didnt want to have to go through the hassel of trying to post the numbers, and then using the tab, etc to get the numbers lined up.