Used seafoam to clean out engine before changing oil and it GELLED??!?
08-01-2003, 05:18 PM
#1
Registered User
Thread Starter
Join Date: Oct 1999
Location: Battle Creek, MI
Posts: 3,532
Used seafoam to clean out engine before changing oil and it GELLED??!?
The oil I drained out turned to gel! I put a can in the crankcase and let it run for about 30 minutes, occasionally varying engine speed.
I drained while still hot.
Later that night when the oil cooled I noticed it was gel! It looks like skinned over pudding... WTF?
I drained while still hot.
Later that night when the oil cooled I noticed it was gel! It looks like skinned over pudding... WTF?
08-01-2003, 05:46 PM
#3
Registered User
Thread Starter
Join Date: Oct 1999
Location: Battle Creek, MI
Posts: 3,532
Re: wtf?
Originally posted by Bobbys_97_Z28
dude...first off...you dont put a "can" in there only like a 1/4 of a can 1/3 at the MOST im going right now to do my tb seafoaming c ya later
dude...first off...you dont put a "can" in there only like a 1/4 of a can 1/3 at the MOST im going right now to do my tb seafoaming c ya later
I had no intentions of driving the vehicle with a full can in there... I wanted it completely flushed out. It is my work truck and the guys that had been using it hadn't changed the oil in a while. I wanted all the deposits gone. I put a can in the gas tank, a can in the crank case, and a can through the TB
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
08-23-2023 11:19 PM
chevroletfreak
LT1 Based Engine Tech
202
07-04-2005 05:00 PM