reamo04

alright, so im finally about to finish up my motor.
For roller rockers, i am looking at these
"Comp Cams Pro-Magnum Non-Self-Aligning Roller Rocker Arms, 7/16" stud, 1.6 Ratio (Single)"
for the 7/16 stud, do i just get the ARP pro-series 7/16 stud, or would the comp cams "highenergy" stud work as well??
Valve springs, the two cams im looking at are pretty big, one recommends the 918 springs, but seeing how many problems they're having, what would be other alternatives?

speed_demon24

PAC springs, check the sponsors section for a group purchase on them that ends at the end of this month.

Revolutionary

how much lift are you running? We've used the 941 springs on a bunch of circle track crate motors and they work great as an alternative to the beehives.

reamo04

well, i will be using one of these (buy with 1.6 RRs)
a)242/248 584/579(with 1.5s)
b) 243/251 560/565 (with 1.5s)