Water Pump Replacement--Cam Swap?
#1
Water Pump Replacement--Cam Swap?
I'm in the process of replacing my water pump and it is kinda a PIA.
How much more tear down is required to get at my cam?
At some point I want to do a cam swap. While I dont really have the cash right now, I could certainly stretch it. Is it worth it just to replace my water pump, only to have to go through x% of this process all over again in less than 24 months?
And FWIW, I already had enough coolant leak over my opti that it might not make it
Oh, and I also need to replace a leaking valve cover gasket, so one of those is coming off too.....
Any advice? I think I might just be looking for justification to to cam my car....
CL
How much more tear down is required to get at my cam?
At some point I want to do a cam swap. While I dont really have the cash right now, I could certainly stretch it. Is it worth it just to replace my water pump, only to have to go through x% of this process all over again in less than 24 months?
And FWIW, I already had enough coolant leak over my opti that it might not make it
Oh, and I also need to replace a leaking valve cover gasket, so one of those is coming off too.....
Any advice? I think I might just be looking for justification to to cam my car....
CL
#5
I would say not quite 25%. Yes for just a cam swap but no for a job done right. No matter what youre gonna need springsand if money is tight you will be cutting corners and not buying quality parts. Thats why I say no
#6
I was thinking of one of these:
http://www.advancedinduction.com/AiProductsCK.html
and a dyno tune....
I think thats about all I would need to get her going?!? Maybe a few gaskets or misc parts, but that should cover it.
I dunno....I hate to think I'm going to end up having to tear this stuff out in less than 2 years as I've always planned on doing a cam/valve train upgrade.
#8
your probably 2% there. you still have to take off the intake manifold, valve covers, drop the oil pan to take off the timing cover, take off the opti, take off the hub which is a bitch to do, take off the timing chain and sprockets, take out the radiator and condensor, undo all the rockers and pull the lifters out. and there is probably some things i forgot to mention
your not even close
your not even close
#9
your probably 2% there. you still have to take off the intake manifold, valve covers, drop the oil pan to take off the timing cover, take off the opti, take off the hub which is a bitch to do, take off the timing chain and sprockets, take out the radiator and condensor, undo all the rockers and pull the lifters out. and there is probably some things i forgot to mention
your not even close
your not even close
What is the chance my opti survived my water pump belching coolant all over it? If that didn't do it in, I rounded off the driver side drain plug so when I took off the water pump, even more coolant got on the opti.
And I've done the oil pan in the past, so that isn't a big deal.
I was hoping I was a little closer
#10
your probably 2% there. you still have to take off the intake manifold, valve covers, drop the oil pan to take off the timing cover, take off the opti, take off the hub which is a bitch to do, take off the timing chain and sprockets, take out the radiator and condensor, undo all the rockers and pull the lifters out. and there is probably some things i forgot to mention
your not even close
your not even close
#13
I don't know what your goals for the car are but with an SLP Firehawk laying down 301 with bolt-ons, I'd stop right where you are and leave it alone. Change the waterpump if you need to and call it good. But that's just me...
#14
I completely disagree with most of the crowd here, I thought removing the waterpump and opti was nearly as much work as removing the intake manifold.
I wouldnt want to be drenching my opti twice (I just drenched mine last week!) so I say go for it now!!
I wouldnt want to be drenching my opti twice (I just drenched mine last week!) so I say go for it now!!