went to the track.....
#16
you cant go by the other guys numbers. The track conditions were different, same as the weather, driver, tires, ect... way too many variables to be an accurate comparison
Your MPH is still decent but your 60's are bad. For you to go 2.3's+ at Atco you were spinning you wheels off! you need to practice your launch. DR's on good night at Atco and you will have a hard time breaking the tires loose.
Your MPH is still decent but your 60's are bad. For you to go 2.3's+ at Atco you were spinning you wheels off! you need to practice your launch. DR's on good night at Atco and you will have a hard time breaking the tires loose.
#19
thats a pretty terrible 60' too, but its a lot different with my 2.73's
i hook but i don't have the power/gear to pull a nasty 60'
i say tighten your plugs and get some dr's
#21
yea thats something i didnt realize til afterward.. my 60 was .1 faster but I have 3.73s and a stall so its a completely different ball game. Oh well theres always next time. I gotta practice my launching and get me some real tires!
#22
#23
no, its just odd
if you look
R/t .619
60' 2.312
330 6.000
1/8 9.005
MPH 81.55
1000 .000
1/4 13.779
MPH 103.89
Run 2
R/T .773
60' 2.155
330 5.860
1/8 8.865
mph 81.38
1000 .000
1/4 13.68
mph 103.53
And the previous owner gave me his old slip this does not include any suspension mods, torque converter, and rockers which are all things I did
R/T .262
60' 1.915
330 5.499
1/8 8.516
mph 80.84
1000 11.118
1/4 13.293
mph 103.84
the ones that u have the fastest MPH is your lowest ETs
if you look
R/t .619
60' 2.312
330 6.000
1/8 9.005
MPH 81.55
1000 .000
1/4 13.779
MPH 103.89
Run 2
R/T .773
60' 2.155
330 5.860
1/8 8.865
mph 81.38
1000 .000
1/4 13.68
mph 103.53
And the previous owner gave me his old slip this does not include any suspension mods, torque converter, and rockers which are all things I did
R/T .262
60' 1.915
330 5.499
1/8 8.516
mph 80.84
1000 11.118
1/4 13.293
mph 103.84
the ones that u have the fastest MPH is your lowest ETs
Thread
Thread Starter
Forum
Replies
Last Post