what options do i have in timing chains and gears for my 96 im doing a cc306 install?
#16
Re: what options do i have in timing chains and gears for my 96 im doing a cc306 install?
You'll need an electric WP of course, since the cam gear doesnt have the ability to drive the stock waterpump. Cam gear just unbolts, but you'll need a gear puller to pull the crank gear. I think you can borrow one from autozone with a deposit - one of my buds had one.
You'll also need to clearance the inside face of the timing cover. You can do this pretty easily with a die grinder and a dedicated alum bit. Put some grease on the chain after the timing set is installed, then test fit/grind, test fit/grind on the cover, until your not getting grease on the cover - then grind a little more to make sure everthing clears when things spin and heat up
You'll also need to clearance the inside face of the timing cover. You can do this pretty easily with a die grinder and a dedicated alum bit. Put some grease on the chain after the timing set is installed, then test fit/grind, test fit/grind on the cover, until your not getting grease on the cover - then grind a little more to make sure everthing clears when things spin and heat up
Thread
Thread Starter
Forum
Replies
Last Post