I have a garage full of engines and parts to get rid of...sell, trade, or barter
#16
ahotrod79 if/when you replace your carb, give me an email for yours.
Maybe you could give me some tips on the 400 also.
Right now I have the stock intake manifold. Timber, do you have any SBC manifolds that would work better?
If I just go witht he stock one for now, it is easy to switch later right?
I will also need headers for it. Its going in my 90 Firebird (origionally 305). So I think the stock exaust manif will fit, but probably choke it. AutoZone sells some real cheap headers, and one guy I talked to said they would work fine, if they fit. So now I am very confused on what to do. These things cost like $80 bucks! I am used to looking at $450-600 for LT1 headers...
------------------
1994 Z28, M6.
13.8@101
No mods....yet.
Pics
Maybe you could give me some tips on the 400 also.
Right now I have the stock intake manifold. Timber, do you have any SBC manifolds that would work better?
If I just go witht he stock one for now, it is easy to switch later right?
I will also need headers for it. Its going in my 90 Firebird (origionally 305). So I think the stock exaust manif will fit, but probably choke it. AutoZone sells some real cheap headers, and one guy I talked to said they would work fine, if they fit. So now I am very confused on what to do. These things cost like $80 bucks! I am used to looking at $450-600 for LT1 headers...
------------------
1994 Z28, M6.
13.8@101
No mods....yet.
Pics
#17
Do you have a set of 350 heads that are aftermarket? I looking to get rid of the stock ones and I have a spare set of 350 heads for trade. Two sets are better than one I guess.
------------------
91 camaroZ28 convertible
rebuilt 350
flomaster cat-back
holley intake\carb
crane cam\lifters
------------------
91 camaroZ28 convertible
rebuilt 350
flomaster cat-back
holley intake\carb
crane cam\lifters
#18
Dolby, your stock manifolds will bolt right up, but will be restrictive (just like they were on your 305). The Hedmann headers AZ carries for $80 will work fine, but plan on getting new ones in a year. They will be rusted out by then. I have various manifolds, all different variations on stock. Some flat, some with a slight high rise, etc.
Crazyj, all the heads I have are various stock versions. 1.94 valves, etc
Right now Dreamer1q wanted me to hold the 400 for him for the weekend. So we'll see if I hear anymore by the end of tomorrow on it. If not, it will still be up for grabs...
[This message has been edited by Timberwolf (edited August 31, 2002).]
Crazyj, all the heads I have are various stock versions. 1.94 valves, etc
Right now Dreamer1q wanted me to hold the 400 for him for the weekend. So we'll see if I hear anymore by the end of tomorrow on it. If not, it will still be up for grabs...
[This message has been edited by Timberwolf (edited August 31, 2002).]
#19
Dolby109, send me an email and let me know what kind of info you need. I have two 400 motors and they are a night and day difference, but they both still get the job done.
------------------
12 second 400 sm blk 79 Street Camaro. 68 camaro with 400sm blk street/strip project
http://www.wilsonmotorsports.net
------------------
12 second 400 sm blk 79 Street Camaro. 68 camaro with 400sm blk street/strip project
http://www.wilsonmotorsports.net
#20
Father inlaw says YES he wants the 400 for the price we agreed on. I will email you tomorrow to set it all up and figure out how and when we can do it.
------------------
Arrest ME Red 1994 Camaro Z28 Convertible
just a chip and a muffler, well maybe some headers
First run EVER
R/T - .675 (on a pro tree)
60 FT - 1.943
1/4 - 13.969 @ 98.77
The Red Rag
------------------
Arrest ME Red 1994 Camaro Z28 Convertible
just a chip and a muffler, well maybe some headers
First run EVER
R/T - .675 (on a pro tree)
60 FT - 1.943
1/4 - 13.969 @ 98.77
The Red Rag
#21
ok. I also have ICQ, and am awaiting authorization to have you on my list...in case you ever use it
I can put it in the truck one of the days this week and meet you somewhere. I may even be up in GR at some time during the week. Probably tuesday or wednesday
I can put it in the truck one of the days this week and meet you somewhere. I may even be up in GR at some time during the week. Probably tuesday or wednesday
Thread
Thread Starter
Forum
Replies
Last Post