Possibly selling a lot of aftermarket f-body parts...
09-05-2002, 03:07 PM
#1
Registered User
Thread Starter
Join Date: Apr 2002
Location: South Lyon, Mi.
Posts: 1,048
Possibly selling a lot of aftermarket f-body parts...
I am trying to sell my 2002 Z28 and nobody knows what the aftermarket parts are on my car and most people are clueless as to what they do so I am thinking of taking off all of my aftermarket parts and selling the car mostly stock with just the aftermarket hood, ram air and spoiler and a few other mods. What do you guys think I should do? Any suggestions will help.
If I do decide to separate them and sell the car cheaper without the mods I will want about $1500 for all of the following mods and hopefully sell them to someone in michigan, what do you guys think of this, I am trying to gauge interest in if its worth it to separate the parts.
possibly selling the following parts:
SLP bolt-on subframe connectors with cross braces and also the SLP driveshaft loop, LGmotorsports G2 front and rear sway bars, G2 strut tower brace, BMR adjustable rear lower control arms with poly bushings, B&M ripper shifter with SLP leather **** and skip shift eliminator, and also a set of Nitto drag radials only 1 month old with 15 light runs on them mounted on salad shooters, a brand new camaro car cover from GM with CAMARO on the front. Everything is less than 4 months old and in perfect condition. I would prefer to sell all the parts at once. What do you guys think I should do?
If anyone has interest email me at: vellaj@cooley.edu
[This message has been edited by jp2002ls1 (edited September 05, 2002).]
If I do decide to separate them and sell the car cheaper without the mods I will want about $1500 for all of the following mods and hopefully sell them to someone in michigan, what do you guys think of this, I am trying to gauge interest in if its worth it to separate the parts.
possibly selling the following parts:
SLP bolt-on subframe connectors with cross braces and also the SLP driveshaft loop, LGmotorsports G2 front and rear sway bars, G2 strut tower brace, BMR adjustable rear lower control arms with poly bushings, B&M ripper shifter with SLP leather **** and skip shift eliminator, and also a set of Nitto drag radials only 1 month old with 15 light runs on them mounted on salad shooters, a brand new camaro car cover from GM with CAMARO on the front. Everything is less than 4 months old and in perfect condition. I would prefer to sell all the parts at once. What do you guys think I should do?
If anyone has interest email me at: vellaj@cooley.edu
[This message has been edited by jp2002ls1 (edited September 05, 2002).]
09-05-2002, 05:33 PM
#3
Registered User
Thread Starter
Join Date: Apr 2002
Location: South Lyon, Mi.
Posts: 1,048
Here is what I would sell the parts for if I decide to part them from my 2002 Z28.
SLP subframe connectors and driveshaft loop $350
G2 front and rear sway bars $190
G2 three point strut tower brace $120
G2 skip shift eliminator $30
you can go to lgmotorsports.com to see what I paid for the G2 products.
BMR chrome moly adjustable rear lower control arms (poly) $130
Nitto drag radials mounted on 96' trans am rims $235
New GM factory car cover with camaro letters $70 (still in box)
email: vellaj@cooley.edu
SLP subframe connectors and driveshaft loop $350
G2 front and rear sway bars $190
G2 three point strut tower brace $120
G2 skip shift eliminator $30
you can go to lgmotorsports.com to see what I paid for the G2 products.
BMR chrome moly adjustable rear lower control arms (poly) $130
Nitto drag radials mounted on 96' trans am rims $235
New GM factory car cover with camaro letters $70 (still in box)
email: vellaj@cooley.edu
09-05-2002, 08:01 PM
#4
Registered User
Join Date: Oct 1999
Location: Battle Creek, MI
Posts: 3,532
Dibs on the car cover. I can't email you from here at work, but you can send me an email and I will get it when I get home. Let me know what payment arrangements you need to have...
BTW, this is my 1000th post....and it only took me 3 years!
LOL
BTW, this is my 1000th post....and it only took me 3 years!
LOL
09-05-2002, 10:06 PM
#5
Registered User
Join Date: Jul 2002
Location: Bloomfield Hills, Mi.
Posts: 276
How much for the shifter??
------------------
SOLD!! 96 camaro ss #1189,
Best time 12.84 @ 107 (wow)
-----------------------
Lt4 Firehawk #25 of 29
Level III, HPP+, 160* power stat, NGK tr55's K&N filter, Borla cat back, possibly more to come...
------------------
SOLD!! 96 camaro ss #1189,
Best time 12.84 @ 107 (wow)
-----------------------
Lt4 Firehawk #25 of 29
Level III, HPP+, 160* power stat, NGK tr55's K&N filter, Borla cat back, possibly more to come...
09-06-2002, 03:46 PM
#7
Registered User
Join Date: May 2002
Location: St.Johns MI
Posts: 824
Car cover is SOLD!!!!!!!! It'll keep the nice third gen warm this winter.....
------------------
91 Z-28 Convertible 305 H.O. 210 RWHP
crane hi-6,holley reg,air foil,3:73 richmonds,Ed Wright stage 2 chip,msd wires,SLP headers,best e.t 14.4@99.02mph
91 Mustang 5.0 LX Convertible. A4, FMS 9mm plug wires, Denso Plugs.Best E.T. 16.097 @ 86.89mph.Best 60 ft 2.4
(Retired 1995 S-10 Blazer 4X4, 230,000 Mi
Leland RD burnout Champ!!!)
------------------
91 Z-28 Convertible 305 H.O. 210 RWHP
crane hi-6,holley reg,air foil,3:73 richmonds,Ed Wright stage 2 chip,msd wires,SLP headers,best e.t 14.4@99.02mph
91 Mustang 5.0 LX Convertible. A4, FMS 9mm plug wires, Denso Plugs.Best E.T. 16.097 @ 86.89mph.Best 60 ft 2.4
(Retired 1995 S-10 Blazer 4X4, 230,000 Mi
Leland RD burnout Champ!!!)
09-07-2002, 07:36 AM
#9
Registered User
Join Date: Dec 2000
Location: Owosso, MI. USA
Posts: 1,023
James, you bastard
Give me the sizes on the front & rear sway bars, and do they come with the poly links?
I might be interested in those & the strut tower brace. post, or email me your #, I'll give you a buzz.
If something works out, I guess I can pick up James car cover for him while I'm there, probably save him some shipping.
------------------
hchap63@hotmail.com
01/SS, Black A4, TR224/112, ARE stage 2 heads, lid, FTRA, PMAF, PTB, Grott LT, true duals, NGK, ASP pulley, Vig 3200, LCA, poly TAB, Convo pros, ET Streets, 3300 raceweight. Little bit of juice..
Best ET: (All bolt ons) 11.496@116.42 (1.52)
Current best after Head & cam & nitrous:
10.88@124 (1.60)
Motown Muscle King of The Hill winner 6-8-02. Want some? Get some!!
RIP #3 Dirty Dale!!!
Give me the sizes on the front & rear sway bars, and do they come with the poly links?
I might be interested in those & the strut tower brace. post, or email me your #, I'll give you a buzz.
If something works out, I guess I can pick up James car cover for him while I'm there, probably save him some shipping.
------------------
hchap63@hotmail.com
01/SS, Black A4, TR224/112, ARE stage 2 heads, lid, FTRA, PMAF, PTB, Grott LT, true duals, NGK, ASP pulley, Vig 3200, LCA, poly TAB, Convo pros, ET Streets, 3300 raceweight. Little bit of juice..
Best ET: (All bolt ons) 11.496@116.42 (1.52)
Current best after Head & cam & nitrous:
10.88@124 (1.60)
Motown Muscle King of The Hill winner 6-8-02. Want some? Get some!!
RIP #3 Dirty Dale!!!
09-07-2002, 09:54 AM
#11
Registered User
Thread Starter
Join Date: Apr 2002
Location: South Lyon, Mi.
Posts: 1,048
The sway bars are sized 32.5 front and 21.5 rear, you can go to lgmotorsports.com and see there description of them and the strut tower brace, I would suggest getting new endlinks. they fit 93-02 f-bodies.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
Moshbmx1
Parts For Sale
1
01-20-2015 03:27 PM