Midwest Illinois, Indiana, Michigan, Ohio, and Wisconsin

Sadly, I am lowering the price way too low on my 69 Camaro...

Thread Tools
 
Search this Thread
 
Old 02-28-2003 | 09:28 PM
  #1  
Timberwolf's Avatar
Thread Starter
Registered User
 
Joined: Oct 1999
Posts: 3,532
From: Battle Creek, MI
Sadly, I am lowering the price way too low on my 69 Camaro...

But it has to go. I can't keep it and stay afloat. I'll buy another one eventually. My home improvement loan is draggin out WAY too long, work is sporadic at best right now, and I have a house under construction and at a standstill. This is the only vehicle I have that I can sell and not have to come up with cash out of my pocket to cover the loan balance thats over and above market value.

New price, $7500 FIRM. This is over $2k less than I paid for it just 6 months ago.

EDIT: my site is back online now...check everything out there (ignore the price on the web page)

You can see all the details here: www.sixtyninecamaro.com/sale.html

If you want to see pictures before the site goes back up, email me or post here and I'll email them to you.

Last edited by Timberwolf; 03-01-2003 at 04:38 PM.
Old 03-01-2003 | 09:00 AM
  #2  
Redbird's Avatar
Registered User
 
Joined: Aug 1998
Posts: 848
From: Rives Jct Mich. USA
Thumbs up

Good Luck, danm a fat block '69 Camaro... it don't get no better than THAT!!
Tub it, stick some huge meats on it and you are ready to go!!!
Can you say 'two big fat black stripes on the road'???

Somebody step up and take this jewel off of Mikes hands, or loan ME the $7500.00!!

HInk (Owner of a few '69's in my younger days, my favorite Camaro!!)
Old 03-01-2003 | 11:00 AM
  #3  
Chris Ja's Avatar
Eternal Member
 
Joined: Apr 2002
Posts: 1,064
From: Warren / Mi
I sent you a PM as I could not get to your web site. I may be interested. Send me some pics and imformation. Hows the paint, body interior. Did you do the engine rebuild? Is it a stick or auto and what gears? Please give me the reg imformation. I may come up and look at it tomorrow if you are going to be home.
Old 03-01-2003 | 01:37 PM
  #4  
treyZ28's Avatar
Banned
 
Joined: Aug 2001
Posts: 3,505
From: looking for a flow bench so Brook and I can race
if i would have known about this 3 months ago, i would have gotten an S-10 or something and grabbed this

My car is now also for sale
$9000
Old 03-01-2003 | 01:39 PM
  #5  
Rodrigues's Avatar
Registered User
 
Joined: Mar 2002
Posts: 1,842
From: Bloomfield Hills MI
Your stroker is for sale?


Originally posted by treyZ28
if i would have known about this 3 months ago, i would have gotten an S-10 or something and grabbed this

My car is now also for sale
$9000
Old 03-01-2003 | 01:39 PM
  #6  
treyZ28's Avatar
Banned
 
Joined: Aug 2001
Posts: 3,505
From: looking for a flow bench so Brook and I can race
Originally posted by Rodrigues
Your stroker is for sale?
i'll sell the car if a reasonable offer comes around
Old 03-01-2003 | 01:51 PM
  #7  
treyZ28's Avatar
Banned
 
Joined: Aug 2001
Posts: 3,505
From: looking for a flow bench so Brook and I can race
shoot me an instant message

I just called up mike
when his DSL gets back up, hes going to shoot me the pics and i'l host them for him
Old 03-01-2003 | 02:16 PM
  #8  
DEVENOMER's Avatar
Banned
 
Joined: Nov 1999
Posts: 455
From: romulus,mi
Is the motor in it and running and does it drive or is it with motor out and no trans? Wasnt sure on this stuff when i e-mailed you before!
Old 03-01-2003 | 02:25 PM
  #9  
treyZ28's Avatar
Banned
 
Joined: Aug 2001
Posts: 3,505
From: looking for a flow bench so Brook and I can race
Originally posted by DEVENOMER
Is the motor in it and running and does it drive or is it with motor out and no trans? Wasnt sure on this stuff when i e-mailed you before!
i'll be mikes rep while his DSL internet is taking a crap

no trans
motor is out i *think*, its never been rebuilt. might be a good idea. or you could put it back together as it was
Old 03-01-2003 | 02:32 PM
  #10  
Timberwolf's Avatar
Thread Starter
Registered User
 
Joined: Oct 1999
Posts: 3,532
From: Battle Creek, MI
Originally posted by DEVENOMER
Is the motor in it and running and does it drive or is it with motor out and no trans? Wasnt sure on this stuff when i e-mailed you before!
Right now the engine is on the stand as I had plans for building a monster motor out of it. The motor is standard bore, and standard crank. It has very slight wear (less than .003). It ran excellenet when I pulled it
I sold the weak 4 speed and had a T56 6 speed lined up for it. The pics show the car with and without the cowl hood (both are included). I have an extra set of heads for the engine (which by thw way is a 454). The heads are GM large oval port 049 heads that have had some gasket matching and mild porting done. Hardened valve seats are pressed in
and the heads are roughed in for 2.19/1.88 valves. I also have brand new manley stainless undercut valves for it, still in the pacakaging.
The interior is black with bucket seats. Everything is in very good
condition. The carpet is new.
The car is 99% rust free, above and below. The trunk is solid, etc
I am hoping the site will be back up today...I exceeded bandwidth on it, but the host told me that should reset the first of the moneht, and well, here we are... I emailed them. I have a LOT more pictures on the site with details and I'd like you to see them all...
Old 03-01-2003 | 02:50 PM
  #11  
Timberwolf's Avatar
Thread Starter
Registered User
 
Joined: Oct 1999
Posts: 3,532
From: Battle Creek, MI
Trey hosted some pics for me. NOTE: the car is NOT pink. It's hugger orange. For some reason the camera I borroed last summer has a problem with any variation of the color red and turns it pink. You can see in the other pic the car is in fact hugger orange. I have a TON more pics of all the little details, close ups of fenders (inner & outer), quarters, trunk, interior, etc with better descriptions as soon as I can get into my site. In the meantime, here you go:
http://www.worldisround.com/articles/15179/index.html
Old 03-01-2003 | 04:39 PM
  #12  
Timberwolf's Avatar
Thread Starter
Registered User
 
Joined: Oct 1999
Posts: 3,532
From: Battle Creek, MI
Thumbs up

site is back up
Old 03-01-2003 | 05:03 PM
  #13  
DEVENOMER's Avatar
Banned
 
Joined: Nov 1999
Posts: 455
From: romulus,mi
you would sell it faster and get the money you want if you had the engine back in and a trans! cause there is alot of nice camaros for $10,000 or less running, but they are too far away! i have seen about 20-40 camaros in good shape going cheap, and they run! me like alot of other people dont like to work on stuff, we like it running! now if i wanted to get a rolling car with no motor and trans in it, theres a bunch of done up cars cheap! im looking for one together and running close!
Old 03-01-2003 | 05:08 PM
  #14  
Timberwolf's Avatar
Thread Starter
Registered User
 
Joined: Oct 1999
Posts: 3,532
From: Battle Creek, MI
Originally posted by DEVENOMER
you would sell it faster and get the money you want if you had the engine back in and a trans! cause there is alot of nice camaros for $10,000 or less running, but they are too far away! i have seen about 20-40 camaros in good shape going cheap, and they run! me like alot of other people dont like to work on stuff, we like it running! now if i wanted to get a rolling car with no motor and trans in it, theres a bunch of done up cars cheap! im looking for one together and running close!
So float me an extra $1500 and I'll drive it to your house
Then you have a kickass car, and it's not too far from your house because it will be delivered to your driveway. Hell, for Another grand I'll put a T56 in it and a 12 bolt 4.10 geared posi as well.
Old 03-01-2003 | 07:05 PM
  #15  
DEVENOMER's Avatar
Banned
 
Joined: Nov 1999
Posts: 455
From: romulus,mi
a th- 350 or a th400 would be great in it!


Quick Reply: Sadly, I am lowering the price way too low on my 69 Camaro...



All times are GMT -5. The time now is 02:33 AM.