For Sale - Eagle F1s 275/40/17
#1
For Sale - Eagle F1s 275/40/17
I have a pair of Eagle F1s with about 2,000 miles for sale. The tires are in Great shape. The rear passenger side tire does have some marks where the sidewall meets the flat of the tire (the thickest part of the tire). Looks lie it hit the lip of the wheel well. The tires have about 90%+ tread left and no problems with them. I had them inspected by Discount Tire where they were purcahsed.
Selling because I am going to Darg Radials.
A Steal at $250 for the pair.
Thanks,
Bill
Selling because I am going to Darg Radials.
A Steal at $250 for the pair.
Thanks,
Bill
#2
Re: For Sale - Eagle F1s 275/40/17
You might be better off leaving the F1's on and getting some cheap salad shooter rims and mounting drag radials on them. Unless you don't plan on ever driving it in the rain, in which case thats a pretty good price for those tires.
#3
Re: For Sale - Eagle F1s 275/40/17
I might have some chrome 16" rims for you in a few weeks bill just in case your thinkin about johns suggestion. the 16" rim will give you a better bite then the 17" tires would too. just a thought.
on another note, hows the car been?
chris
on another note, hows the car been?
chris
#4
Re: For Sale - Eagle F1s 275/40/17
Originally Posted by IrocSS85
I might have some chrome 16" rims for you in a few weeks bill just in case your thinkin about johns suggestion. the 16" rim will give you a better bite then the 17" tires would too. just a thought.
on another note, hows the car been?
chris
on another note, hows the car been?
chris
Chris,
Thanks for asking about the car. It is doing okay. Not so sure the car has the best programming in it. The car ran a 12.39 at 110 mph on the Eagle F1s. I don't understand how the cra can run a 89-90mph 1/8 and only a 110mph 1/4. I need to get it on the Dyno ASAP. I have been trying to get time but no luck. I will make sure it happens next week sometime. I am going to Livernois to Dyno. I'm not sure what the latest time in the day they can do it. The Car only has a 2800 stall converter so I need to swap that out for 3800. That should help all the way down the track. I would think it would also drop my 1/4 Mph by 1 mph. I can just see running a 12.0-11.9 at 109mph.
So, all in all I am middle of the road with the car. I get compliments all the time on how nice it looks. It drives great, just misssing a little bit of power or tuning I think.
How are things with you? I saw you are moving. Congrats on the new house. If I can get dyno time next week I will swing by after and see if you are around.
Take Care,
Bill
#5
Re: For Sale - Eagle F1s 275/40/17
that doesnt sound too bad bill, 12.39? you car does have a walbro fuel pump in it right? do you ahve a fuel press. gauge? the fuel press. could be droppin off at the big end of the track killing power. are you sure that stall isnt actually stallin a little higher? big stall conv.s give you exactly what you got. a killer et but a not so killer MPH. those big steam roller tires you got on the front arent helping any either. but the ET sounds good to me considering you have no lightweight car and on street radials. what kind of 60's were you getting? Id think the tires alone might help you pick up a couple tenths. were gonna have to meet at the track sometime cause it sounds like your car might be a good goal for me to try and beat. I know mine needs a dyno tuna also cause this mailorder tune is running rich and I got the same stall issues you got, but atleast you got a good 2800 stall. mine's a 12"er and def. isnt 2.5str. do you have a switch to lock up your conv.? if not that'll pick up a few MPH right there and maybe some et also. you'd be amaized to see how much it slips once you get it around 6000rpm. my Iroc picked up like 2.5mph and .2 at the track lockin it up. and on the highway it was like 300rpm diff. I need to do that to my 95 also. soo much to do so little time. talk to ya later and do stop by if you get it over there
chris
chris
Thread
Thread Starter
Forum
Replies
Last Post
Drtryder
LT1 Based Engine Tech
10
04-22-2015 04:17 PM