WTB - Headight Motor (94 Formula II)
11-16-2003 | 10:36 PM
#2
Eternal Member
Joined: Apr 2002
Posts: 1,064
From: Warren / Mi
Have you tried taking the gear off the motor and reversing it? That is what goes bad most of the time. The teeth wear off on one side because it runs on one side. Rev the gear and it runs on that side. Hope this helps.
11-17-2003 | 06:29 AM
#3
Registered User
Joined: Dec 2000
Posts: 709
From: Waterford, MI, USA
Is it right or left side? Due to the way they are bolted in, they are not interchangable. I have an assembly in my garage I'd sell for $75, but I'd have to dig it up to see if it was right or left side.
Last edited by TA Jack; 11-17-2003 at 06:33 AM.
11-17-2003 | 07:43 AM
#4
Thread Starter
Registered User
Joined: Feb 2003
Posts: 132
From: SE Michigan
Originally posted by Chris Ja
Have you tried taking the gear off the motor and reversing it? That is what goes bad most of the time. The teeth wear off on one side because it runs on one side. Rev the gear and it runs on that side. Hope this helps.
Have you tried taking the gear off the motor and reversing it? That is what goes bad most of the time. The teeth wear off on one side because it runs on one side. Rev the gear and it runs on that side. Hope this helps.
11-17-2003 | 07:45 AM
#5
Thread Starter
Registered User
Joined: Feb 2003
Posts: 132
From: SE Michigan
Originally posted by TA Jack
Is it right or left side? Due to the way they are bolted in, they are not interchangable. I have an assembly in my garage I'd sell for $75, but I'd have to dig it up to see if it was right or left side.
Is it right or left side? Due to the way they are bolted in, they are not interchangable. I have an assembly in my garage I'd sell for $75, but I'd have to dig it up to see if it was right or left side.
Thank you
11-19-2003 | 08:35 PM
#7
Thread Starter
Registered User
Joined: Feb 2003
Posts: 132
From: SE Michigan
Thanks TA - I will send you an email to arrange pickup etc.
Arctic - not sure - I am trying to locate this for a friend of my wife's - that is the spec she gave me. When I find out - I can let you know.
Arctic - not sure - I am trying to locate this for a friend of my wife's - that is the spec she gave me. When I find out - I can let you know.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM