1969 Camaro Anvil Carbon Fiber Inner Fenders / DSE / LS6 parts
11-20-2012, 09:19 AM
#1
Registered User
Thread Starter
Join Date: Jan 2010
Posts: 3
1969 Camaro Anvil Carbon Fiber Inner Fenders / DSE / LS6 parts
1969 Camaro Anvil Carbon Fiber Inner Fenders, Acworth GEORGIA
I am listing these items for a friend (they are not mine, and I have no interest in them / etc.). I am just helping a buddy that needs to get rid of some parts. Ask any question and I will relay to him and will respond. If you need more pictures or want to see something not shown, let me know and I can go by on the weekend to get more pictures.
Each item is for a 1969 Camaro only. He is located in Acworth, GA, 30102. If you are interested in any of the parts, post here or pm, or email to sparky@rndfabrication.com and I will put you in touch with the seller. All the parts can be shipped or picked up in Acworth at his location. Due to the value and size of the parts, I assume they will need to be crated and shipped by freight to protect them. But I will discuss with my friend and see what he recommends.
Anvil Carbon Fiber & Fiberglass Inner Fenders
These are fiberglass inner fenders that then have carbon fiber installed on top off. These are new, but have about 2-4 scuffs on the top of from shipping. The scuffs are on the clear and can easily be buffed out. They retail for around $1,100. Price is $900 plus shipping.
Detroit Speed & Engineering Rear Offset Shackles and Perches for Mini-Tubs (for leaf springs)
These are new and include hardware as shown in the pictures. There are a few nicks from shipping and storage, but are very minor. Price is $300 for all plus shipping. (SALE PENDING)
2001 LS6 Engine
12,000 miles approximately
Non-LS6 intake without port behind throttle body
New, never installed Corvette Accessory Drive
F-body oil pan
Price: $3,650
I am listing these items for a friend (they are not mine, and I have no interest in them / etc.). I am just helping a buddy that needs to get rid of some parts. Ask any question and I will relay to him and will respond. If you need more pictures or want to see something not shown, let me know and I can go by on the weekend to get more pictures.
Each item is for a 1969 Camaro only. He is located in Acworth, GA, 30102. If you are interested in any of the parts, post here or pm, or email to sparky@rndfabrication.com and I will put you in touch with the seller. All the parts can be shipped or picked up in Acworth at his location. Due to the value and size of the parts, I assume they will need to be crated and shipped by freight to protect them. But I will discuss with my friend and see what he recommends.
Anvil Carbon Fiber & Fiberglass Inner Fenders
These are fiberglass inner fenders that then have carbon fiber installed on top off. These are new, but have about 2-4 scuffs on the top of from shipping. The scuffs are on the clear and can easily be buffed out. They retail for around $1,100. Price is $900 plus shipping.
Detroit Speed & Engineering Rear Offset Shackles and Perches for Mini-Tubs (for leaf springs)
These are new and include hardware as shown in the pictures. There are a few nicks from shipping and storage, but are very minor. Price is $300 for all plus shipping. (SALE PENDING)
2001 LS6 Engine
12,000 miles approximately
Non-LS6 intake without port behind throttle body
New, never installed Corvette Accessory Drive
F-body oil pan
Price: $3,650
Last edited by Sparkybinder; 11-21-2012 at 11:42 AM.
Thread
Thread Starter
Forum
Replies
Last Post
PFYC
Supporting Vendor Group Purchases and Sales
0
12-04-2014 11:56 AM
Omega9
Car Audio and Electronics
5
08-17-2002 04:23 PM