I have an 82 Z-28 with a 305 bored to 311.6 cubes. It has a polished steel crank, shotpeened and polished rods, and 10.5:1 pistons. Edelbrock 650 carb, with performer intake, and a comp 280H cam. Engine has less than 8000 miles on it.

The heads are off of a 92 caprice, have been milled, align bored, the swirls have been machined off. They also have roller tip rockers and valve guides. The springs can easily handle the cam lift. This engine was built by an ASE certified mechanic, and is SOLID. Desktop Dyno says roughly 350HP.

The trans is a 4 speed with lakewood bellhousing and hurst shifter.However, this trans has locked up and the clutch is about gone. Included is a T-5 with shifter, bellhousing, and clutch that only has 1000 miles on it.

The car also needs interior pieces, I have many plastics that come with it, but it needs carpet door panels and headliner.

The rear end is a 3.23 with a posi that needs to be rebuilt.

There are alot of really good parts in this car. It would be a great drag car, or take the performance parts to your camaro. Must be picked up. Need to sell ASAP. Email me at guitarjam6@aol.com for pics or call me at 404-232-0926. Im near Atlanta.

$1900

 

TTT. Its still here. Currently putting the T-5 in now, and its just been sanded for new paint.